Каталог Iscar токарный инструмент 2017 - страница 174
Навигация
Каталог Iscar резьбонарезные фрезы
Каталог Iscar инструмент для обработки алюминиевых колёс
Каталог Iscar державки и пластины для нарезания резьбы 2022
Каталог Iscar расточные системы 2022
Каталог Iscar высокоточные развертки и метчики 2022
Токарные инструменты Iscar (часть 2) 2026
TPGB
Triangular Inserts with an 11° Positive Flank for Short Chipping Materials
r
Dimensions
l
di
91º 95º
d1 11° S Recommended Machining Data
ap f
| Designation | l | di | S | r | d 1 | (mm) | (mm/rev) | |
| TPGB 110204 | 11.00 | 6.35 | 2.38 | 0.40 | 3.00 | • | 1.00-3.00 | 0.05-0.25 |
- For user guide and cutting speed recommendations, see pages 197-212
For tools, see pages: A/E/S-STFPR/L (97) A/S-STLPR/L (98) E-STFPR/L-HEAD (97)
60°
TPGB-XL
Triangular Inserts with an 11° Positive 8.0 Flank for Short Chipping Materials d 1 11° r d
i 80° S
Dimensions
91º 95º
Recommended Machining Data
ap f
| Designation | l | di | S | r | d1 | (mm) | (mm/rev) | |
| TPGB 110204-XL | 11.00 | 6.35 | 2.38 | 0.40 | 3.00 | • | 1.00-3.00 | 0.05-0.25 |
- For user guide and cutting speed recommendations, see pages 197-212
For tools, see pages: A/E/S-STFPR/L (97) A/S-STLPR/L (98) E-STFPR/L-HEAD (97)
TPGH-R/L
Triangular Inserts with an 11° Positive and Ground Chipformer for Finish Turning
Dimensions
r
60°
l d1 11° di S Tough 1 Hard
91º 95º
Recommended Machining Data
ap f
| Designation | l | di | S | r | d1 | (mm) | (mm/rev) | ||
| TPGH 110204-L | 11.00 | 6.35 | 2.38 | 0.40 | 3.00 | • | 1.00-3.00 | 0.05-0.25 | |
| TPGH 110208-L | 11.00 | 6.35 | 2.38 | 0.80 | 3.00 | • | 1.00-3.00 | 0.05-0.25 | |
| TPGH 160304-R/L | 16.50 | 9.52 | 3.18 | 0.40 | 4.30 | • | 1.00-4.00 | 0.05-0.30 | |
| TPGH 160308-L | 16.50 | 9.52 | 3.18 | 0.80 | 4.30 | • | 1.00-4.00 | 0.05-0.30 |
- For user guide and cutting speed recommendations, see pages 197-212
For tools, see pages: A/E/S-STFPR/L (97) A/S-STLPR/L (98) E-STFPR/L-HEAD (97)
60°
TPGH-XL
Triangular Inserts with an 8.0 11° Positive and Ground Chipformer for Finish Turning d1 r 11°
di 80° S
Dimensions
91º 95º
Recommended Machining Data
ap f
| Designation | l | di | S | r | d1 | (mm) | (mm/rev) | |
| TPGH 110204-XL | 11.00 | 6.35 | 2.38 | 0.40 | 3.00 | • | 1.00-3.00 | 0.05-0.25 |
For tools, see pages: A/E/S-STFPR/L (97) A/S-STLPR/L (98) E-STFPR/L-HEAD (97)