Каталог Iscar торцевые фрезы 2022 - страница 84

PROFILING TOOLS BHTA DRVS BCM-M Ball Nose Endmills withFLEXFIT Threaded Adaptation DCX THSZMS DCONMS Rd° Carrying Tangent Straight EdgeInserts for Finish Profiling RE APMX LF OAL Designation DCX(1) RE CICT(2) APMX LF OAL THSZMS DCONMS DRVS(3) MIID(4) TQ_3(5) kg BCM D25-M12 25.00 12.50 2 20.00 46.00 68.00 M12 23.00 19.0 BCR D250-QT 33 0.12 BCM D25-M16 25.00 12.50 2 20.00 46.00 71.00 M16 29.00 25.0 BCR D250-QT 40 0.16 BCM D32-M16 32.00 16.00 2 26.00 53.00 78.00 M16 29.00 25.0 BCR D320-CS 40 0.22 • For user guide, see pages 542-547 • When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the TQ_3 parameter (1) Cutting diameter maximum (2) Number of inserts (3) Clamping wrench size (4) Master insert identification (5) Tool tightening torque Nxm (lbfxin) For inserts, see pages: BCR (535) For holders, see pages: BT-ODP (FLEXFIT) (314) • C#-ODP (FLEXFIT) (314) • CAB M-M (FLEXFIT) (312) • DIN69871-ODP (315) • ER-ODP (315) • HSK A-ODP (FLEXFIT) (316) • S M (312) • S M-C-H (312) • S M-CF (313) Spare Parts Designation BCM D25-M12 SR 14-601 BLD T15/S7 SW6-T BCM D25-M16 SR 14-601 BLD T15/S7 SW6-T BCM D32-M16 SR 14-544 BLD T15/S7 SW6-T DRVS DCX THSZMS DCONMS Rd° BCM-MM Ball Nose Endmills with MULTI-MASTER Threaded Adaptation RE APMX LF Carrying Tangent Straight Edge OAL Inserts for Finish Profiling Designation DCX(2) RE APMX CICT(3) LF OAL DRVS(4) DCONMS THSZMS CSP(5) MIID(6) kg BCM D12-MMT08 12.00 6.00 9.60 2 20.00 28.00 10.0 11.50 T08 0 BCR D120-QT 0.01 BCM D16-MMT10 16.00 8.00 12.70 2 25.00 36.80 13.0 15.20 T10 0 BCR D160-QT 0.03 BCM D20-MMT12 20.00 10.00 17.00 2 35.00 48.80 15.0 18.50 T12 0 BCR D200.. 0.06 BCM D20-MMT12-CC (1) 20.00 10.00 17.00 2 35.00 48.80 15.0 18.50 T12 0 BCR D200.. 0.10 BCM D25-MMT15-C 25.00 12.50 20.00 2 40.00 57.00 19.0 24.00 T15 1 BCR D250-QT 0.11 • Do not apply lubricant to the MULTI-MASTER threaded connection • For adaptation options, see page 261 • For user guide, see pages 542-547 (1) Center Cutting (2) Cutting diameter maximum (3) Number of inserts (4) Clamping wrench size (5) 0 - Without coolant supply, 1 - With coolant supply (6) Master insert identification For inserts, see pages: BCR (535) For holders, see pages: MM CAB (667) • MM S-A (stepped shanks) (84) • MM S-A (straight shanks) (87) • MM S-A-C# (86) • MM S-A-HSK (609) • MM S-A-N (85) • MM S-A-SK (90) • MM S-B (85° conical shanks) (87) • MM S-D (89° conical shanks) (88) • MM S-ER (89) • MM S-ER-H (89) • MM TS-A (86) Spare Parts Designation BCM D12-MMT08 SR 10503457 T-6/51 BCM D16-MMT10 SR 34-505/1 MHG 2.5X7.2 T-8/53 BCM D20-MMT12 SR 34-506/L T-9/51 BCM D20-MMT12-CC SR 34-506/L T-9/51 BCM D25-MMT15-C SR 14-601 BLD T15/S7 SW6-T 268 ISCAR