Каталог Iscar отрезка 2022 - страница 18
Навигация
Токарные инструменты Iscar (часть 1) 2026
Каталог Iscar монолитные фрезы 2022
Инструменты для обработки отверстий Iscar 2026
Каталог Iscar резьбонарезные фрезы
Каталог Iscar расточные системы
Каталог Iscar токарный инструмент 2017
| CDX | LH | |||||||||
| DGTR/L-B-T-SH Reinforced Parting and Grooving | H | H | OAH | |||||||
| Short Head Tools Carrying DGN Double-Ended Inserts | CUTDIA CWN-CWX WF | OAL | B | WB | ||||||
| Left-hand | shown | |||||||||
| Designation CWN(1) | CWX(2) | H | B WB | WF OAL | LH | CUTDIA | CDX(3) | OAH | ||
| DGTR/L 2009B-1.5T9SH 1.00 | 1.50 | 20.0 | 9.0 1.20 | 8.40 100.00 | 19.0 | 95.0 | 9.00 | 23.7 | SR 16-236 P | T-15/5 |
- Important: 1.4 mm width inserts should be used only on tools for 1.4 mm specific width
- For user guide, see pages 538-547
(1) Minimum cutting width (2) Maximum cutting width (3) Cutting depth maximum
For inserts, see pages: DGN-P (487) DGN/DGNM-J/JS/JT (483) DGR-P (488) DGR/L-J/JS (484)
| LH | L | H | ||||||||
| DGTR/L | HBH | |||||||||
| Integral Shank Parting | H | H | ||||||||
| and Grooving Tools | B | WB | CUTDIA CWN-CWX | |||||||
| OAL | Right-han | d shown | ||||||||
| Designation | CWN(1) | CWX(2) | H | B | WB | OAL | LH HBH | CUTDIA | Insert | |
| DGTR/L 1010-2 | 1.90 | 2.50 | 10.0 | 10.0 | 1.80 | 150.00 | 29.0 6.6 | 35.0 | DG. 1.../DG. 2.. | EDG 33B |
| DGTR/L 1212-2 | 1.90 | 2.50 | 12.0 | 12.0 | 1.80 | 150.00 | 29.0 6.6 | 35.0 | DG. 1.../DG. 2.. | EDG 33B |
| DGTR/L 1616-2 | 1.90 | 2.50 | 16.0 | 16.0 | 1.80 | 150.00 | 29.0 2.6 | 35.0 | DG. 1.../DG. 2.. | EDG 33B |
| DGTR/L 2012-2 | 1.90 | 2.50 | 20.0 | 12.0 | 1.80 | 125.00 | 29.0 - | 35.0 | DG. 1.../DG. 2.. | EDG 33A |
| DGTR/L 1212-3 | 3.00 | 3.18 | 12.0 | 12.0 | 2.50 | 150.00 | 29.0 6.6 | 35.0(3) | DG. 1.../DG. 3.. | EDG 33B |
| DGTR/L 1616-3 | 3.00 | 3.18 | 16.0 | 16.0 | 2.50 | 150.00 | 29.0 6.6 | 35.0 (4) | DG. 1.../DG. 3.. | EDG 33B |
| DGTR/L 2012-3 | 3.00 | 3.18 | 20.0 | 12.0 | 2.50 | 125.00 | 29.0 - | 35.0(3) | DG. 1.../DG. 3.. | EDG 33A |
| DGTR/L 2020-3 | 3.00 | 3.18 | 20.0 | 20.0 | 2.50 | 125.00 | 29.0 - | 35.0 (3) | DG. 1.../DG. 3.. | EDG 33A |
| DGTR/L 2525-3 | 3.00 | 3.18 | 25.0 | 25.0 | 2.50 | 150.00 | 29.0 - | 35.0 (3) | DG. 1.../DG. 3.. | EDG 33A |
| DGTR/L 2020-4 | 4.00 | 4.76 | 20.0 | 20.0 | 3.40 | 125.00 | 31.0 - | 51.0 | DG. 4.../GRIP 4.. | EDG 33A |
| DGTR/L 2525-4 | 4.00 | 4.76 | 25.0 | 25.0 | 3.40 | 150.00 | 31.0 - | 51.0 | DG. 4.../GRIP 4.. | EDG 33A |
| DGTR/L 2020-5 | 4.80 | 5.00 | 20.0 | 20.0 | 4.00 | 125.00 | 33.0 - | 59.0 | DG. 5.../GRIP 5.. | EDG 33A |
| DGTR/L 2525-5 | 4.80 | 5.00 | 25.0 | 25.0 | 4.00 | 150.00 | 33.0 - | 76.0 | DG. 5.../GRIP 5.. | EDG 33A |
| DGTR/L 2525-6 | 6.00 | 6.35 | 25.0 | 25.0 | 5.30 | 150.00 | 33.0 - | 76.0 | DG. 6.../GRIP 6.. | EDG 33A |
- Insert limit is Tmax=18 mm. If deeper penetration is required, the insert should be modified into single-ended by the user
- DG..1.0 insert can be mounted into pocket sizes 2 and 3, in which case the pocket width has to be modified - see page 479
- For user guide, see pages 538-547
(1) Minimum cutting width (2) Maximum cutting width (3) Dmax=43 mm when single-ended insert is used (4) Dmax=43(1.69") when single-ended insert is used * Optional, should be ordered separately
For inserts, see pages: DGN-LF/LFT (485) DGN-MF (485) DGN/DGNC/DGNM-C (481) DGR/L-C DGRC/LC-C (482) DGN/DGNM-J/JS/JT (483)
- DGR/L-J/JS (484)
- DGN-P (487)
- DGN-UT/UA (487)
- DGN-W (482)
- DGN-WP (488)
- DGN-Z (486)
- DGR-P (488)
- DGR-WP (488)
- DGR-Z/ZS (486)
- GRIP (269)
- GRIP (full radius) (270)
LH
DGTR/L-BC-T
| Parting and Grooving | H | H | |
| Tools with Coolant Holes | WB CWN-CWX | ||
| Carrying JET-CUT Inserts | |||
| B | WF | ||
| CDX | |||
| OAL | Right-hand shown |
| Designation | H | B | CWN(1) | CWX (2) | OAL | WB | WF | LH | CDX(3) | Insert | |
| DGTR/L 20BC-4T25 | 20.0 | 20.0 | 4.00 | 4.00 | 140.00 | 3.40 | 18.30 | 42.0 | 25.00 | DGNC/DGRC/DGLC 4... | |
| DGTR/L 25BC-4T25 | 25.0 | 25.0 | 4.00 | 4.00 | 140.00 | 3.40 | 23.30 | 42.0 | 25.00 | DGNC/DGRC/DGLC 4... |
- For user guide, see pages 538-547
(1) Minimum cutting width (2) Maximum cutting width (3) Cutting depth maximum
For inserts, see pages: DGN-UT/UA (487) DGN/DGNC/DGNM-C (481) DGN/DGNM-J/JS/JT (483) DGR/L-C DGRC/LC-C (482) DGR/L-J/JS (484)
Spare Parts
| Designation | ||
| DGTR/L-BC-T | SR M6X16 DIN912 SGCU 341 CGF 343 | CF 343 CGM 343 HW 5.0 |