Каталог Iscar отрезка 2022

DGTR/L-B-D-TR Reinforced Parting and Grooving		DGTR with D	/L..12B- GN/R/L	1.5D... 1000 inserts	H CUTDIA	LH			H OAH	WB2
Tools Carrying Double-Ended DO-GRIP Inserts		C	DX=3	0.75 WB	WF CWN-CWX	HBL HB	H OAL		B	WB		Right	-hand shown
Designation	CWN(1)	CWX(2)	H	B	WB WB	2 WF	OAL	LH	HBL	CUTDIA	OAH	HBH	Insert
DGTR/L 12B-1.4D20-TR12	1.40	1.40	12.0	12.0	1.00 2.3	11.50	95.00	32.5	20.00	20.0	23.7	8.0	DG. 14..
DGTL 12B-1.5D20-TR12	1.00	1.50	12.0	12.0	1.20 2.3	11.30	95.00	32.5	20.00	20.0	23.7	8.0	DG. 1.../DG. 15..
DGTR 12B-1.5-D20-TR12	1.00	1.50	12.0	12.0	1.20 2.3	11.30	95.00	32.5	20.00	20.0	23.7	8.0	DG. 1.../DG. 15..

Important: 1.4 mm width inserts should be used only on tools for 1.4 mm specific width!
For TRAUB machines, model TNL 12/7
For user guide, see pages 538-547

(1) Minimum cutting width (2) Maximum cutting width

For inserts, see pages: DGN-P (487) DGN/DGNM-J/JS/JT (483) DGR-P (488) DGR/L-J/JS (484)

DGTR/L-B-D-TR SR 16-236 P(a) T-15/5

(a) 3N*M(26.5LBF*in)

DGTR/L-XL Integral Shank Reinforced Par and Grooving Tools for Partin	ting g			H CUTDIA	LH	OAL HBH		H
Up to 65 mm Diameters				CWN-CWX	WB
				WF				B		Left-han	d shown
Designation	CW	CUTDIA	H	B	WB	OAL	LH	WF	HBH
DGTR/L 20B-2XL-D60	2.00	60.0	20.0	20.0	1.74	150.00	43.2	19.10	8.0	SR M4X35DIN912	HW 3.0
DGTR/L 25B-2XL-D60	2.00	60.0	25.0	25.0	1.74	150.00	43.2	24.10	3.0	SR M4X35DIN912	HW 3.0
DGTR/L 20B-3XL-D65	3.00	65.0	20.0	20.0	2.40	150.00	43.2	18.80	12.0	SR M5X40DIN912	HW 4.0
DGTR/L 25B-3XL-D65	3.00	65.0	25.0	25.0	2.40	150.00	43.2	23.80	7.0	SR M5X40DIN912	HW 4.0

For inserts, see pages: DGN-C-XL (490) DGN-J-XL (491) DGR/L-C-XL (491) DGR/L-J-XL (491)

Depth of Cut as Function of Workpiece Diameter

Tmax/Dmax for Tmax/Dmax for DGTR/L...-2XL DGTR/L...-3XL

31 70 32.5 65