Каталог Iscar отрезка 2022 - страница 17
Навигация
Токарные инструменты Iscar (часть 1) 2026
Каталог Iscar монолитные фрезы 2022
Инструменты для обработки отверстий Iscar 2026
Каталог Iscar резьбонарезные фрезы
Каталог Iscar расточные системы
Каталог Iscar токарный инструмент 2017
| DGTR/L-B/BC-D Integral Shank Reinforced P and Grooving Tools Especia for DGNC Type of Inserts | arting lly | DGTL | -BC-D | CWN- | L H CWX | H H O | DGTL-B-D BH AL | H | WB | |||
| WF CDX | B | Left-hand shown | ||||||||||
| Designation | CWN(3) | CWX(4) | H | B | WB | OAL | LH | CDX(5) | WF | HBH | CSP(6) | Insert |
| DGTR/L 10B-1.4D20 | 1.40 | 1.40 | 10.0 | 10.0 | 1.00 | 140.00 | 23.6 | 10.00 | 9.50 | 2.0 | 0 | DG. 14.. |
| DGTR/L 12B-1.4D30 | 1.40 | 1.40 | 12.0 | 12.0 | 1.00 | 140.00 | 29.6 | 15.00 | 11.50 | 3.5 | 0 | DG. 14.. |
| DGTR/L 16B-1.4D30 | 1.40 | 1.40 | 16.0 | 16.0 | 1.00 | 140.00 | 29.6 | 15.00 | 15.50 | - | 0 | DG. 14.. |
| DGTR/L 20B-1.4D30 | 1.40 | 1.40 | 20.0 | 20.0 | 1.00 | 140.00 | 29.6 | 15.00 | 19.50 | - | 0 | DG. 14.. |
| DGTR/L 10B-2D30 | 1.90 | 2.50 | 10.0 | 10.0 | 1.60 | 140.00 | 29.6 | 15.00 | 9.20 | 6.6 | 0 | DG. 1.../DG. 2.. |
| DGTR/L 12B-2D30 | 1.90 | 2.50 | 12.0 | 12.0 | 1.60 | 140.00 | 29.6 | 15.00 | 11.20 | 3.5 | 0 | DG. 1.../DG. 2.. |
| DGTR/L 16B-2D32 | 1.90 | 2.50 | 16.0 | 16.0 | 1.60 | 140.00 | 30.6 | 16.00 | 15.20 | - | 0 | DG. 1.../DG. 2.. |
| DGTR/L 20B-2D35 | 1.90 | 2.50 | 20.0 | 20.0 | 1.60 | 140.00 | 32.1 | 17.50 | 19.20 | - | 0 | DG. 1.../DG. 2.. |
| DGTR/L 25B-2D35 | 1.90 | 2.50 | 25.0 | 25.0 | 1.60 | 140.00 | 32.1 | 17.50 | 24.20 | - | 0 | DG. 1.../DG. 2.. |
| DGTR/L 12B-3D30 | 3.00 | 3.18 | 12.0 | 12.0 | 2.40 | 140.00 | 29.6 | 15.00 | 10.80 | 3.5 | 0 | DG. 1.../DG. 3.. |
| DGTR/L 16B-3D35 | 3.00 | 3.18 | 16.0 | 16.0 | 2.40 | 140.00 | 32.1 | 16.00 | 14.80 | 2.6 | 0 | DG. 1.../DG. 3.. |
| DGTR/L 16BC-3D35(1) | 3.00 | 3.18 | 16.0 | 16.0 | 2.40 | 140.00 | 31.1 | 16.00 | 14.80 | 2.6 | 1 | DGNC/DGRC/DGLC 3... |
| DGTR/L 20B-3D40(2) | 3.00 | 3.18 | 20.0 | 20.0 | 2.40 | 140.00 | 35.6 | 20.00 | 18.80 | - | 0 | DG. 1.../DG. 3.. |
| DGTR/L 20BC-3D40(1) | 3.00 | 3.18 | 20.0 | 20.0 | 2.40 | 140.00 | 34.6 | 20.00 | 18.80 | - | 1 | DGNC/DGRC/DGLC 3... |
| DGTR/L 25B-3D40(2) | 3.00 | 3.18 | 25.0 | 25.0 | 2.40 | 140.00 | 35.6 | 20.00 | 23.80 | - | 0 | DG. 1.../DG. 3.. |
- Important: 1.4 mm width inserts should be used only on tools for 1.4 mm specific width tools
- DGN/R/L 1 mm inserts can also be mounted into pocket sizes 2 and 3.
- For insert depth capacity table and modification instructions for the 2 and 3 holder pockets, see page 479
- For user guide, see pages 538-547
(1) Tools for inserts with coolant holes for high temperature alloys and stainless steel (2) Insert's Tmax=18 mm, for deeper penetration modify insert into single-ended (3) Minimum cutting width (4) Maximum cutting width (5) The specified limit refers to the tool (6) 0 - Without coolant supply, 1 - With coolant supply
For inserts, see pages: DGN-LF/LFT (485) DGN-P (487) DGN-UT/UA (487) DGN-WP (488) DGN-Z (486) DGN/DGNC/DGNM-C (481)
- DGN/DGNM-J/JS/JT (483)
- DGR-P (488)
- DGR-WP (488)
- DGR-Z/ZS (486)
- DGR/L-C DGRC/LC-C (482)
- DGR/L-J/JS (484)
Spare Parts
| Designation | ||||||
| DGTR/L 10B-1.4D20 | SR M5X12 DIN912 | HW 4.0 | ||||
| DGTR/L 12B-1.4D30 | SR M5X12 DIN912 | HW 4.0 | ||||
| DGTR/L 16B-1.4D30 | SR M5X12 DIN912 | HW 4.0 | ||||
| DGTR/L 20B-1.4D30 | SR M5X12 DIN912 | HW 4.0 | ||||
| DGTR/L 10B-2D30 | SR M5X12 DIN912 | HW 4.0 | ||||
| DGTR/L 12B-2D30 | SR M5X12 DIN912 | HW 4.0 | ||||
| DGTR/L 16B-2D32 | SR M4X14 DIN912 | HW 3.0 | ||||
| DGTR/L 20B-2D35 | SR M4X14 DIN912 | HW 3.0 | ||||
| DGTL 25B-2D35 | SR M5X12 DIN912 | HW 4.0 | ||||
| DGTR 25B-2D35 | SR M4X14 DIN912 | HW 3.0 | ||||
| DGTR/L 12B-3D30 | SR M5X12 DIN912 | HW 4.0 | ||||
| DGTR/L 16B-3D35 | SR M5X12 DIN912 | HW 4.0 | ||||
| DGTR/L 16BC-3D35 | SR M5X12 DIN912 | HW 4.0 | CGM 343 | CF 343 | SGCU 341 | CGF 343 |
| DGTR/L 20B-3D40 | SR M5X12 DIN912 | HW 4.0 | ||||
| DGTR/L 20BC-3D40 | SR M5X12 DIN912 | HW 4.0 | CGM 343 | CF 343 | SGCU 341 | CGF 343 |
| DGTR/L 25B-3D40 | SR M5X12 DIN912 | HW 4.0 |
* Optional, should be ordered separately