Каталог Iscar отрезка 2022 - страница 123

IC830 IC8250 IC808 IC908 IC20 IC5010 IC5010 IC428 IC806IC428 IC807 IC635 IC20 FACE GROOVING ±0.1 GIFG-E (W=8)Inserts for Deep Face 30 Ref.CDX 6.4 Grooving and Turning REDAXN BW CW Dimensions Tough 1  Hard RecommendedMachining Data f face-groove Designation CW RE CWTOL(1) RETOL(2) DAXN(3) CDX(4) BW (mm/rev) GIFG 8.00E-0.80 8.00 0.80 0.02 0.050 50.0 25.00 6.00 • • 0.15-0.25 GIFG 8.00E-1.20 8.00 1.20 0.02 0.050 50.0 25.00 6.00 • 0.15-0.25 • For cutting speed recommendations, see pages 604-613 (1) Cutting width tolerance (+/-) (2) Corner radius tolerance (+/-) (3) Minimum axial grooving diameter (4) Cutting depth maximum For tools, see pages: GAFG-R/L-8 (580) • GHFG-R/L-8 (579) • GHFGR/L-8 (579) GIF-E (W=8,10) ±0.025 30 Ref. Precision Double-Ended Insertsfor Grooving and Turning 7° 6.4BW CW RE Dimensions Tough 1  Hard Recommended Machining Data ap f turn f groove Designation CW RE CWTOL(1) RETOL(2) BW CDX(3) (mm) (mm/rev) (mm/rev) GIF 8.00E-0.40 8.00 0.40 0.02 0.030 6.00 27.00 • • • 0.50-4.80 0.29-0.48 0.18-0.31 GIF 8.00E-0.80 8.00 0.80 0.02 0.050 6.00 27.00 • • • • • • • • • 1.00-4.80 0.32-0.56 0.18-0.34 GIF 8.00E-1.20 8.00 1.20 0.02 0.050 6.00 27.00 • • • • • • • 1.45-4.80 0.32-0.62 0.18-0.34 GIF 10.00E-0.80 10.00 0.80 0.02 0.050 8.00 27.00 • • • • • • • • 1.00-6.00 0.35-0.65 0.22-0.40 GIF 10.00E-1.20 10.00 1.20 0.02 0.050 8.00 27.00 • • • • • • 1.45-6.00 0.35-0.72 0.22-0.40 • DMIN for internal machining = 65 mm • For cutting speed recommendations and user guide, see pages 604-613 (1) Cutting width tolerance (+/-) (2) Corner radius tolerance (+/-) (3) Cutting depth maximum For tools, see pages: C#-GHDR/L (274) • CGHN-8-10D (287) • GADR/L-8 (286) • GADR/L-JHP (287) • GAFG-R/L-8 (580) • GHDR/L (long pocket) (285) • GHDR/L-JHP (long pocket) (285) • GHFG-R/L-8 (579) • GHFGR/L-8 (579) • GHIR/L (W=7.0-8.3) (355) ±0.025 GIA-K (long pocket) 30 Ref.15° Flat Top Precision Double-Ended CDX 7° 6.4 Inserts with T-Land for Machining BW Cast Iron DAXN CW RE Dimensions Tough 1  Hard Recommended Machining Data ap f turn f groove Designation CW RE CWTOL(1) RETOL(2) BW CDX(3) DAXN(4) (mm) (mm/rev) (mm/rev) GIA 8.00K-0.80 8.00 0.80 0.02 0.050 6.00 25.00 160.0 • • 1.00-4.80 0.36-0.64 0.18-0.38 GIA 8.00K-1.20 8.00 1.20 0.02 0.050 6.00 25.00 160.0 • • 1.45-4.80 0.36-0.70 0.18-0.38 • DMIN for internal machining = 65 mm • For cutting speed recommendations and user guide, see pages 604-613 (1) Cutting width tolerance (+/-) (2) Corner radius tolerance (+/-) (3) Cutting depth maximum (4) Minimum axial grooving diameter For tools, see pages: C#-GHDR/L (274) • CGHN-8-10D (287) • GADR/L-8 (286) • GADR/L-JHP (287) • GAFG-R/L-8 (580) • GHDR/L (long pocket) (285) • GHDR/L-JHP (long pocket) (285) • GHFG-R/L-8 (579) • GHFGR/L-8 (579) • GHIR/L (W=7.0-8.3) (355) 581