Каталог Iscar отрезка 2022

HFPAD-JHP Adapters for Face Machining			ØDAXN CDX	WF CW -DAXX HF OA	OAH WB L		Right	-hand shown
Designation	CW	CDX	WF WB	OAL	HF	OAH	DAXN(1)	DAXX(2)
HFPAD 3R/L-40-T10-JHP	3.00	10.00	4.80 5.80	39.50	24.0	33.00	40.0	65.0
HFPAD 3R/L-115-T18-JHP	3.00	18.00	4.80 5.80	43.50	24.0	33.00	115.0	400.0
HFPAD 3R/L-65-T18-JHP	3.00	18.00	4.80 5.80	43.50	24.0	33.00	65.0	115.0
HFPAD 4R/L-44-T14-JHP	4.00	14.00	4.80 5.80	40.50	24.0	33.00	44.0	58.0
HFPAD 4R/L-58-T14-JHP	4.00	14.00	4.80 5.80	40.50	24.0	33.00	58.0	88.0
HFPAD 4R/L-88-T14-JHP	4.00	14.00	4.50 5.80	40.50	24.0	33.00	88.0	175.0
HFPAD 4R/L-175-T20-JHP	4.00	20.00	4.80 6.50	45.50	24.0	33.00	175.0	800.0
HFPAD 5R/L-110-T14-JHP	5.00	14.00	4.50 6.30	45.50	24.0	33.00	110.0	200.0
HFPAD 5R/L-40-T14-JHP	5.00	14.00	4.50 6.30	40.50	24.0	33.00	40.0	50.0
HFPAD 5L-50-T14-JHP	5.00	14.00	4.50 6.30	40.50	24.0	33.00	50.0	75.0
HFPAD 5R/L-75-T14-JHP	5.00	14.00	4.50 6.30	40.50	24.0	33.00	75.0	110.0
HFPAD 5R/L-200-T20-JHP	5.00	20.00	4.50 6.60	45.50	24.0	33.00	200.0	800.0
HFPAD 6R/L-60-T14-JHP	6.00	14.00	4.50 6.80	40.50	24.0	33.00	60.0	100.0
HFPAD 6R/L-100-T20-JHP	6.00	20.00	4.50 6.80	45.50	24.0	33.00	100.0	200.0
HFPAD 6R/L-200-T20-JHP	6.00	20.00	4.50 7.10	45.50	24.0	33.00	200.0	3000.0

WF(assembly)=WF(shank) + WF(adapter)
HGN,GRIP,DGN inserts can be used only with right-hand adapters, HGPL inserts with left-hand adapters
For user guide, see pages 604-613

(1) Minimum axial grooving diameter (2) Maximum axial grooving diameter

For inserts, see pages: DGN-MF (485) DGN-W (482) DGN/DGNC/DGNM-C (481) DGN/DGNM-J/JS/JT (483) GRIP (269) GRIP (full radius) (270)

For holders, see pages: C#-MAHD-JHP (624) C#-MAHPD-JHP (625) MAHPR/L-JHP (281) MAHPR/L-XL-JHP (561) MAHR/L-JHP (279) MAHR/L-JHP-MC (280)

HFPAD-3 Adapters for Face Machining		DA C	H WF( XN-DAXX DX	OA HF WF (adapter) CW older: MAHPL Holder: MAHR OHN assembly)	OAH L W	B2 D	Left-	hand shown
Designation	DAXN(1)	DAXX(2)	CW	CDX OHN(3) WF(4)	WB	2 OAL	HF	OAH
HFPAD 3R/L-25-T10	25.0	30.0	3.00	10.00 15.0 4.80	5.8	39.50	24.0	32.0
HFPAD 3R/L-30-T10	30.0	40.0	3.00	10.00 15.0 4.80	5.8	39.50	24.0	32.0
HFPAD 3R/L-40-T10	40.0	65.0	3.00	10.00 15.0 4.80	5.8	39.50	24.0	32.0
HFPAD 3R/L-65-T18	65.0	115.0	3.00	18.00 19.0 4.80	5.8	43.50	24.0	32.0
HFPAD 3R/L-115-T18	115.0	400.0	3.00	18.00 19.0 4.80	5.8	43.50	24.0	32.0

WF(assembly)=WF(shank) + WF(adapter)
HGN & GRIP 3.. inserts can be used only with right-hand adapters, HGPL 3.. inserts with left-hand adapters
For user guide, see pages 604-613

(1) Minimum penetration diameter (2) Maximum penetration diameter (3) Minimum overhang (4) WF(adapter)

For inserts, see pages: GRIP (269) GRIP (full radius) (270) HGN-C (489) HGN-J (489) HGN-UT (490) HGPL (578)

For holders, see pages: C#-MAHD-JHP (624) C#-MAHPD-JHP (625) IH-HFPAD (571) MAHR/L-JHP-MC (280) MAHPR/L-JHP (281)

Каталог Iscar отрезка 2022 - страница 104