Каталог Iscar обработка канавок 2022 - страница 29
Навигация
Каталог Iscar монолитные концевые фрезы и система multi-master
Фрезерные инструменты Iscar 2026
Каталог Iscar сверла ружейные и для глубокого сверления 2022
Каталог Iscar токарные державки ISO 2022
Каталог Iscar инструмент для обработки алюминиевых колёс
| CGHN-D Double-Ended Blades for | OHX | CWN-CWX |
| External Grooving and Turning | CUTDIA=2xOHX | H HF |
| OAL | WB |
| Designation | H | CWN(1) | CWX(2) | OHN(3) | OHX(4) | HF | OAL | WB |
| CGHN 26-3D | 26.0 | 2.80 | 4.00 | 10.0 | 15.0 | 21.4 | 110.00 | 2.40 |
| CGHN 26-4D | 26.0 | 3.50 | 4.50 | 10.0 | 15.0 | 21.4 | 110.00 | 3.20 |
| CGHN 26-5D | 26.0 | 4.40 | 6.40 | 10.0 | 20.0 | 21.4 | 110.00 | 4.00 |
| CGHN 32-3D | 32.0 | 2.80 | 4.00 | 10.0 | 19.0 | 24.8 | 150.00 | 2.40 |
| CGHN 32-4D | 32.0 | 3.50 | 5.00 | 12.0 | 21.0 | 24.8 | 150.00 | 3.20 |
| CGHN 32-5D | 32.0 | 4.40 | 6.40 | 12.0 | 26.0 | 24.8 | 150.00 | 4.00 |
| CGHN 32-6D | 32.0 | 5.50 | 6.40 | 12.0 | 26.0 | 24.8 | 150.00 | 5.20 |
- Use the yellow lines on blade for min. and max. overhang
- When using TIP inserts, toolholder seat needs to be modified according to insert profile to ensure clearance
- When using a double-ended insert, grooving depth is limited by the insert
- For user guide, see pages 419-428, 432-436
(1) Minimum cutting width (2) Maximum cutting width (3) Minimum overhang (4) Maximum overhang
For inserts, see pages: GIA-K (W=3-6) (298) GIF (297) GIF (full radius) (298) GIF-E (W=4-6 full radius) (294) GIF-E (W=4-6) (292)
- GIM-C (521)
- GIM-J (522)
- GIM-J-RA/LA (522)
- GIM-UT (524)
- GIM-UT-RA/LA (524)
- GIM-W (523)
- GIM-W-RA/LA (523)
- GIMF (288)
- GIMN (289)
- GIMT (287)
- GIMY (288)
- GIMY (full radius) (290)
- GIMY-F (291)
- GIP (297)
- GIP (full radius) (296)
- GIP-E (293)
- GIP-E (full radius) (294)
- GIPA (full radius W=3-6) (301)
- GIPA (W=3-6) (300)
- GIPM-A46 / GIP-1250 (375)
- GIPY (300)
- GITM (299)
- GITM (full radius) (299)
- TIP-MT (647)
- TIP-P-BSPT (674)
- TIP-P-BSW (668)
- TIP-P-ISO (658)
- TIP-P-NPT (671)
- TIP-P-UN (664)
- TIP-WT (641)
For holders, see pages: SGTBU/SGTBN (616) UBHCR/L (618)
| CGHN-DG Double-Ended Blades for | OHX CWN-CWX |
| External Grooving and Turning | CUTDIA=2xOHX H HF |
| Self-Clamped Inserts | OAL WB |
| Designation | H | CWN(1) | CWX(2) | OHX(3) | OHX2(4) | HF | OAL | WB | |
| CGHN 32-3DG | 32.0 | 2.80 | 4.00 | 50.0 | 25.0 | 24.8 | 150.00 | 2.40 | EDG 44A |
| CGHN 32-4DG | 32.0 | 3.50 | 5.00 | 50.0 | 30.0 | 24.8 | 150.00 | 3.20 | EDG 44A |
| CGHN 32-5DG | 32.0 | 4.40 | 6.40 | 60.0 | 33.0 | 24.8 | 150.00 | 4.00 | EDG 44A |
| CGHN 32-6DG | 32.0 | 5.50 | 6.40 | 60.0 | 35.0 | 24.8 | 150.00 | 5.20 | EDG 44A |
- DO-GRIP clamping insert is self-retained for long overhang
- When using TIP inserts, toolholder seat needs to be modified according to insert profile to ensure clearance
- When using a double-ended insert, grooving depth is limited by the insert
- For user guide, see pages 419-428, 432-436
(1) Minimum cutting width (2) Maximum cutting width (3) Maximum overhang for grooving (4) Maximum overhang for turning * Optional, should be ordered separately
For inserts, see pages: GIA-K (W=3-6) (298) GIF (297) GIF (full radius) (298) GIF-E (W=4-6 full radius) (294) GIF-E (W=4-6) (292)
- GIM-C (521)
- GIM-J (522)
- GIM-J-RA/LA (522)
- GIM-UT (524)
- GIM-UT-RA/LA (524)
- GIM-W (523)
- GIM-W-RA/LA (523)
- GIMF (288)
- GIMN (289)
- GIMT (287)
- GIMY (288)
- GIMY (full radius) (290)
- GIMY-F (291)
- GIP (297)
- GIP (full radius) (296)
- GIP-E (293)
- GIP-E (full radius) (294)
- GIP-UN (303)
- GIPA (full radius W=3-6) (301)
- GIPA (W=3-6) (300)
- GIPM-A46 / GIP-1250 (375)
- GIPY (300)
- GITM (299)
- GITM (full radius) (299)
- TIP-MT (647)
- TIP-P-BSPT (674)
- TIP-P-BSW (668)
- TIP-P-ISO (658)
- TIP-P-NPT (671)
- TIP-P-UN (664)
- TIP-WT (641)
For holders, see pages: C#-TBK-R/L (623) HSK A-WH-TBK-R/L (632) SGTBU/SGTBN (616) UBHCR/L (618)
| CGHN-P8 Blades for Deep Grooving and Turning | OHX | H HF | |||||||
| CW | OAL | 150˚ WB | |||||||
| Designation | CW | OHX(3) | CDX(4) | WB | HF | H | OAL | ||
| CGHN 52-P8(1) | 8.00 | 50.0 | 43.00 | 7.40 | 45.0 | 52.6 | 190.00 | SR 76-1637 | HW 4.0 |
| CGHN 53-P8(2) | 8.00 | 70.0 | 63.00 | 7.40 | 45.0 | 52.6 | 260.00 | SR 76-1637 | HW 4.0 |
- For user guide, see pages 419-428, 432-436
(1) If CUTDIA (workpiece) is smaller than 200 mm, then CDX=48; if CUTDIA (workpiece) is larger than 200 mm, then CDX=43 (2) If CUTDIA (workpiece) is smaller than 200 mm, then CDX=68; if CUTDIA (workpiece) is larger than 200 mm, then CDX=63 (3) Maximum overhang
For inserts, see pages: GIMF (288) GIMM 8CC (583) GIMY (288) GIMY (full radius) (290) GIMY-F (291) GIPY (300)
For holders, see pages: SGTBK (617) SGTBU/SGTBN (616)