Каталог Iscar обработка канавок 2022 - страница 177

Предыдущая страница Следующая страница

Навигация

High-Pressure Coolant with Grooving Test

GROOVE-TURN and Parting Tools In grooving and parting operations, applying high-pressure coolant provides excellent chip breaking results on all materials. On exotic alloys such as Inconel and Titanium,

it is usually impossible to break the chips with standard external coolant pressure. Applying high coolant pressure provides excellent chip

breaking results. On some alloyed and stainless steel,Material: Titanium (Ti6Al4v)
especially when low feeds are applied, high-pressureOperation: Grooving
coolant may solve chip breaking problems.
Tool: GHDL 25-6-JHP
High-pressure coolant reduces or even eliminates
built-up edge phenomenon, especially when machiningInsert: GIMF 608 IC07
stainless steel and high temperature alloys.Vc: 50 mm/min
In turning operations, applying high-pressure coolant is lessf: 0.15 mm/rev
effective because the jet is directed to the frontal edge.
Pressure [bar]
Assembly and Safety Guidelines when Using350 70 10 (External)

the JET HP Iso Turning and Grooving Tools Before use, please ensure that:

  • The machine door is in a fully closed position
  • The coolant hose is in the correct location and fully tightened with all seals in position
  • A blank plug is inserted into the unused coolant hole
  • All O-rings and washers are in place
  • The coolant hose is tightened securely to the toolholder Tool Life and tool block to prevent leakage of coolant 25 Important Always pay attention not to exceed the 20 maximum safe working pressure for GROOVE-TURN tools 340 bar and 15 PARTING OFF tools 300 bar.

10 5 H.P. Coolant Hose 0

10 70 350

Pressure [bar] 1/8” BSPP Adaptation Nipple

Copper Seal Washer 1/8”

Plug Screw