Каталог Iscar обработка канавок 2022

ISO Material	Condition	Tensile Strength [N/mm2]	Hardness HB	Material Group No.(1)
< 0.25 %C	Annealed	420	125	1
Nlltldt >= 0.25 %C	Annealed	650	190	2
on-aoy see an cas steel free cutting steel < 0.55 %C	Quenched and tempered	850	250	3
, >= 0.55 %C	Annealed	750	220	4
>= 0.55 %C	Quenched and tempered	1000	300	5
P	Annealed	600	200	6
Low alloy steel and cast steel		930	275	7
(less than 5% all elements)	Quenched and tempered	1000	300	8
		1200	350	9
High alloy steel cast steel tool steel	Annealed	680	200	10
, ,	Quenched and tempered	1100	325	11
PStainless steel and cast steel	Ferritic/martensitic	680	200	12
	Martensitic	820	240	13
M Stainless steel and cast steel	Austenitic,duplex	600	180	14
GtiGG	Pearlitic/ferritic		180	15
rey cas ron ()	Pearlitic/martensitic		260	16
K Ductile cast iron (nodular) (GGG)	Ferritic		160	17
	Pearlitic		250	18
Malleable cast iron	Ferritic		130	19
	Pearlitic		230	20
Alih ll	Not hardenable		60	21
umnum-wrougt aoys	Hardenable		100	22
	Not hardenable		75	23
Aluminum-cast alloys	Hardenable		90	24
N >12% Si	High temperature		130	25
>1% Pb	Free cutting		110	26
Copper alloys	Brass		90	27
	Electrolitic copper		100	28
Non-metallic	Duroplastics,fiberplastics			29
	Hard rubber			30
Fe based	Annealed		200	31
	Hardened		280	32
High temp. alloys	Annealed		250	33
S Ni or Co based	Hardened		350	34
	Cast		320	35
Titanium alloys	Pure	400		36
	Alpha+beta alloys hardened	1050		37
Hardened steel	Hardened		55 HRC	38
H	Hardened		60 HRC	39
Chilled cast iron Cast iron	Cast Hardened		400 55 HRC	40 41

(1) For material groups, see pages 786-815

Каталог Iscar обработка канавок 2022 - страница 178