Каталог Iscar концевые фрезы со сменными пластинами 2022 - страница 39
Навигация
Каталог Iscar токарный инструмент
Инструменты для обработки отверстий Iscar 2026
Каталог Iscar токарные пластины ISO 2022
Каталог Iscar высокоточные развертки и метчики 2022
Каталог Iscar крепление инструмента
Каталог Iscar сверла ружейные и для глубокого сверления 2022
| OAL | ||||||||||
| CH45-PN06 Upper and Bottom Chamfering Endmills Carrying Pentagonal Inserts | 45˚ DC DC2 DCX | 45˚ | DCONMS | |||||||
| APMX2 APMX | LU LU2 | |||||||||
| Designation | DCX(1) | DC2 DC | APMX | APMX2 | DCONMS CICT(2) | LU | LU2 | OAL | DMIN(3) | kg |
| CH45-10-30-1-C12-PN06 | 11.70 | 8.45 6.60 | 1.50 | 1.50 | 12.00 1 | 29.40 | 25.40 | 100.00 | 10.00 | 0.00 |
| CH45-17-60-2-C16-PN06 | 16.70 | 13.45 11.40 | 1.50 | 1.50 | 16.00 2 | 29.40 | 25.40 | 110.00 | 17.00 | 0.13 |
| CH45-19-80-3-C16-PN06 | 18.70 | 15.45 13.40 | 1.50 | 1.50 | 16.00 3 | 29.40 | 25.40 | 130.00 | 19.00 | 0.16 |
(1) Cutting diameter maximum (2) Number of inserts (3) Minimum penetration diameter for back chamfering
For inserts, see pages: PNMT 0602-TN (540)
| Spare Parts | |
| Designation | |
| CH45-PN06 | SR M2.5X5-T7-60 T-7/51 |
| DC DC2 DCX | L | F OAL | DRVS THSZ DCON | MS S | |||||||||
| CH45-MM-PN06 Upper and Bottom Chamfering Endmills with MULTI-MASTER Threaded Adaptation | 45˚ APMX APMX | 2 | 45˚ LF2 | ||||||||||
| Designation | DCX(1) | DC2 | DC | APMX | APMX2 | LF LF2 | OAL | DCONM | S THSZMS | CICT(2) | DRVS(3) | DMIN(4) | kg |
| CH45-10/.39-1-MMT05-PN06 | 11.70 | 8.45 | 6.60 | 1.50 | 1.50 | 13.00 9.00 | 19.75 | 7.60 | T05 | 1 | 5.5 | 10.00 | 0.00 |
| CH45-17/.67-2-MMT08-PN06 | 16.70 | 13.45 | 11.40 | 1.50 | 1.50 | 18.00 14.00 | 25.50 | 12.20 | T08 | 2 | 10.0 | 17.00 | 0.02 |
| CH45-19/.75-3-MMT10-PN06 | 18.70 | 15.45 | 13.40 | 1.50 | 1.50 | 20.00 16.00 | 31.30 | 15.30 | T10 | 3 | 13.0 | 19.00 | 0.02 |
- Do not apply lubricant to the MULTI-MASTER threaded connection
- For adaptation options, see page 44
- For user guide see pages 542-548
(1) Cutting diameter maximum (2) Number of inserts (3) Width across flats (wrench should be ordered separately) (4) Minimum penetration diameter for back chamfering
For inserts, see pages: PNMT 0602-TN (540)
For holders, see pages: MM CAB (667) MM CAB-T-T (91) MM GRT (shanks) (86) MM S-A (stepped shanks) (84) MM S-A (straight shanks) (87)
- MM S-A-C# (86)
- MM S-A-HSK (609)
- MM S-A-N (85)
- MM S-A-SK (90)
- MM S-B (85° conical shanks) (87)
- MM S-D (89° conical shanks) (88)
- MM S-ER (89)
- MM S-ER-H (89)
- MM TS-A (86)
| Spare Parts | |
| Designation | |
| CH45-MM-PN06 | SR M2.5X5-T7-60 T-7/51 |