Каталог Iscar концевые фрезы со сменными пластинами 2022 - страница 20
Навигация
Каталог Iscar токарный инструмент
Инструменты для обработки отверстий Iscar 2026
Каталог Iscar токарные пластины ISO 2022
Каталог Iscar высокоточные развертки и метчики 2022
Каталог Iscar крепление инструмента
Каталог Iscar сверла ружейные и для глубокого сверления 2022
| DRV | S THS | ZMS | Rd° | ||||||||||
| HP E90AN-MM-07 | DC | DCONMS | |||||||||||
| 90° Endmills with a | |||||||||||||
| MULTI-MASTER Threaded Adaptation Carrying HELIPLU | S | OAL LF APMX | |||||||||||
| HP ANKT 0702.. Inserts | |||||||||||||
| Designation | DC | CICT(1) | OAL | LF | APMX | THSZMS | DCONMS | DRVS(2 | ) RMPX°(3) | RMPX°2(4) | kg | ||
| HP E90AN-D12-2-MMT08 | 12.00 | 2 | 24.45 | 16.50 | 7.70 | T08 | 10.60 | 10.0 | 2.7 | 3.5 | 0.01 | SR 34-533/L/HG | T-6/51 |
| HP E90AN-D16-3-MMT10 | 16.00 | 3 | 31.75 | 20.00 | 7.70 | T10 | 14.95 | 13.0 | 3.2 | 6.0 | 0.03 | SR 34-533/L/HG | T-6/51 |
| HP E90AN-D16-4-MMT10 | 16.00 | 4 | 31.75 | 20.00 | 7.70 | T10 | 14.95 | 13.0 | 3.2 | 6.0 | 0.03 | SR 34-533/L/HG | T-6/51 |
| HP E90AN-D20-5-MMT12 | 20.00 | 5 | 35.30 | 21.50 | 7.70 | T12 | 18.40 | 16.0 | 2.4 | 4.5 | 0.05 | SR 34-533/L/HG | T-6/51 |
- Do not apply lubricant to the MULTI-MASTER threaded connection
- For adaptation see page 44
- For user guide see pages 542-548
(1) Number of inserts (2) Clamping wrench size (3) Maximum ramping angle (4) Values only for HP ANKT 0702R12T-FF insert
For inserts, see pages: HP ANCR 0702PNFR (444) HP ANKT 0702...-FF (445) HP ANKT/ANCT 0702..PN-R/PNTR (444) HP ANKW 070204PNTR (444)
For holders, see pages: MM CAB (667) MM GRT (shanks) (86) MM S-A (stepped shanks) (84) MM S-A (straight shanks) (87) MM S-A-C# (86)
- MM S-A-HSK (609)
- MM S-A-N (85)
- MM S-A-SK (90)
- MM S-B (85° conical shanks) (87)
- MM S-D (89° conical shanks) (88)
- MM S-ER (89)
- MM S-ER-H (89)
- MM TS-A (86)
Rd°
HM390 ETC-07
90° Endmills Carrying HM390 DC DCONMS
TCKT 0703 Triangular Inserts with 3 Helical Cutting Edges APMX LH
OAL
| Designation | DC | APMX | CICT(1) | OAL | LH | DCONMS | Shank(2) | RMPX°(3) | kg | ||
| HM390 ETC D14-1-C16-07 | 14.00 | 5.00 | 1 | 80.00 | 21.0 | 16.00 | C | 1.9 | 0.10 | SR M2.5X5-T7-60 | T-7/51 |
| HM390 ETC D16-2-C15-07-B | 16.00 | 5.00 | 2 | 150.00 | 26.0 | 15.00 | C | 1.9 | 0.17 | SR M2.5X5-T7-60 | T-7/51 |
| HM390 ETC D16-2-C16-07 | 16.00 | 5.00 | 2 | 100.00 | 26.0 | 16.00 | C | 1.9 | 0.12 | SR M2.5X5-T7-60 | T-7/51 |
| HM390 ETC D16-2-C16-07-B | 16.00 | 5.00 | 2 | 150.00 | 40.0 | 16.00 | C | 1.9 | 0.19 | SR M2.5X5-T7-60 | T-7/51 |
| HM390 ETC D16-2-W16-07 | 16.00 | 5.00 | 2 | 80.00 | 26.0 | 16.00 | W | 1.9 | 0.10 | SR M2.5X5-T7-60 | T-7/51 |
| HM390 ETC D18-2-C16-07 | 18.00 | 5.00 | 2 | 100.00 | 30.0 | 16.00 | C | 1.4 | 0.13 | SR M2.5X5-T7-60 | T-7/51 |
| HM390 ETC D18-2-C16-07-B | 18.00 | 5.00 | 2 | 160.00 | 30.0 | 16.00 | C | 1.4 | 0.21 | SR M2.5X5-T7-60 | T-7/51 |
| HM390 ETC D20-3-C16-07 | 20.00 | 5.00 | 3 | 55.00 | 20.0 | 16.00 | C | 1.4 | 0.07 | SR M2.5X5-T7-60 | T-7/51 |
| HM390 ETC D20-3-C19-07-B | 20.00 | 5.00 | 3 | 160.00 | 30.0 | 19.00 | C | 1.4 | 0.28 | SR M2.5X5-T7-60 | T-7/51 |
| HM390 ETC D20-3-C20-07 | 20.00 | 5.00 | 3 | 110.00 | 30.0 | 20.00 | C | 1.4 | 0.21 | SR M2.5X5-T7-60 | T-7/51 |
| HM390 ETC D20-3-C20-07-B | 20.00 | 5.00 | 3 | 160.00 | 40.0 | 20.00 | C | 1.4 | 0.31 | SR M2.5X5-T7-60 | T-7/51 |
| HM390 ETC D20-3-W20-07 | 20.00 | 5.00 | 3 | 85.00 | 30.0 | 20.00 | W | 1.4 | 0.16 | SR M2.5X5-T7-60 | T-7/51 |
| HM390 ETC D22-3-C20-07 | 22.00 | 5.00 | 3 | 110.00 | 30.0 | 20.00 | C | 1.0 | 0.21 | SR M2.5X5-T7-60 | T-7/51 |
| HM390 ETC D22-3-C20-07-B | 22.00 | 5.00 | 3 | 180.00 | 30.0 | 20.00 | C | 1.0 | 0.37 | SR M2.5X5-T7-60 | T-7/51 |
| HM390 ETC D25-4-C25-07 | 25.00 | 5.00 | 4 | 120.00 | 35.0 | 25.00 | C | 1.0 | 0.36 | SR M2.5X6-T7-60 | T-7/51 |
| HM390 ETC D25-4-W25-07 | 25.00 | 5.00 | 4 | 95.00 | 35.0 | 25.00 | W | 1.0 | 0.28 | SR M2.5X6-T7-60 | T-7/51 |
| HM390 ETC D28-4-C25-07-B | 28.00 | 5.00 | 4 | 200.00 | 35.0 | 25.00 | C | 0.9 | 0.64 | SR M2.5X6-T7-60 | T-7/51 |
| HM390 ETC D32-5-C32-07 | 32.00 | 5.00 | 5 | 130.00 | 45.0 | 32.00 | C | 0.8 | 0.68 | SR M2.5X6-T7-60 | T-7/51 |
| HM390 ETC D32-5-W32-07 | 32.00 | 5.00 | 5 | 110.00 | 45.0 | 32.00 | W | 0.8 | 0.56 | SR M2.5X6-T7-60 | T-7/51 |
- Insert clamping screw must be lubricated every indexing.
- Tightening torque 0.9 Nxm.
- For user guide see pages 542-548
(1) Number of inserts (2) C-Cylindrical, W-Weldon (3) Maximum ramping angle
For inserts, see pages: HM390 TCKT/CT 0703 (446)
| DRVS | THSZM | S | Rd° | |||||||||
| HM390 ETC-MM 90° Endmills with a | DC | DC | ONMS | |||||||||
| MULTI-MASTER Threaded Adaptation Carrying HM390 | LF APM | X | ||||||||||
| TCKT 0703 Triangular Inserts | OAL | |||||||||||
| Designation | DC | APMX | CICT(1) | LF | DCONMS | THSZMS | OAL | DRVS(2) | RMPX°(3) | kg | ||
| HM390 ETC D16-2-MMT10-07 | 16.00 | 5.00 | 2 | 16.00 | 15.20 | T10 | 27.30 | 13.0 | 1.9 | 0.02 | SR M2.5X5-T7-60 | T-7/51 |
| HM390 ETC D20-3-MMT12-07 | 20.00 | 5.00 | 3 | 20.00 | 18.30 | T12 | 33.30 | 16.0 | 1.4 | 0.04 | SR M2.5X5-T7-60 | T-7/51 |
| HM390 ETC D25-4-MMT15-07 | 25.00 | 5.00 | 4 | 25.00 | 23.90 | T15 | 42.00 | 20.0 | 1.0 | 0.08 | SR M2.5X6-T7-60 | T-7/51 |
- Insert clamping screw must be lubricated every indexing.
- Tightening torque 0.9 Nxm.
- For adaptation see page 44
- For user guide see pages 542-548
(1) Number of inserts (2) Clamping wrench size
For inserts, see pages: HM390 TCKT/CT 0703 (446)
For holders, see pages: MM S-A (stepped shanks) (84) MM S-A (straight shanks) (87) MM S-A-C# (86) MM S-A-HSK (609) MM S-A-N (85) MM S-A-SK (90)
- MM S-B (85° conical shanks) (87)
- MM S-D (89° conical shanks) (88)
- MM S-ER (89)
- MM S-ER-H (89)
- MM TS-A (86)