Каталог Iscar концевые фрезы со сменными пластинами 2022 - страница 21
Навигация
Каталог Iscar токарный инструмент
Инструменты для обработки отверстий Iscar 2026
Каталог Iscar токарные пластины ISO 2022
Каталог Iscar высокоточные развертки и метчики 2022
Каталог Iscar крепление инструмента
Каталог Iscar сверла ружейные и для глубокого сверления 2022
| 90° Endmills Carrying Tangenti | ally | DC | D | CONMS | Rd° | |||||||||
| Clamped Inserts with 4 Helical | , | |||||||||||||
| 8 mm Long Cutting Edges | AP | LU LH MX | OAL | |||||||||||
| Designation | DC | CICT(1) | LH | LU | APMX | OAL | DCONMS | Shank(2) | CSP(3 | ) RMPX°(4) | RMPX° | 2(5) kg | ||
| T490 ELN D16-2-C15-08B | 16.00 | 2 | 41.0 | 40.0 | 8.00 | 150.00 | 15.00 | C | 1 | 2.0 | 1.1 | 0.18 | SR 10502813-HGSM | IP-7/51 |
| T490 ELN D16-2-C16-08 | 16.00 | 2 | 28.0 | 26.0 | 8.00 | 90.00 | 16.00 | C | 0 | 2.0 | 1.1 | 0.13 | SR 10502813-HGSM | IP-7/51 |
| T490 ELN D16-2-C16-08C | 16.00 | 2 | 28.0 | 26.0 | 8.00 | 90.00 | 16.00 | C | 1 | 2.0 | 1.1 | 0.12 | SR 10502813-HGSM | IP-7/51 |
| T490 ELN D16-2-W16-08 | 16.00 | 2 | 28.0 | 26.0 | 8.00 | 85.00 | 16.00 | W | 0 | 2.0 | 1.1 | 0.12 | SR 10502813-HGSM | IP-7/51 |
| T490 ELN D16-2-W16-08C | 16.00 | 2 | 28.0 | 26.0 | 8.00 | 85.00 | 16.00 | W | 1 | 2.0 | 1.1 | 0.11 | SR 10502813-HGSM | IP-7/51 |
| T490 ELN D18-2-C20-08C | 18.00 | 2 | 28.0 | 26.0 | 8.00 | 90.00 | 20.00 | C | 1 | 1.8 | 1.0 | 0.18 | SR 10502813-HGSM | IP-7/51 |
| T490 ELN D20-2-C19-08B | 20.00 | 2 | 41.0 | 40.0 | 8.00 | 160.00 | 19.00 | C | 1 | 1.7 | 0.8 | 0.31 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D20-2-C20-08C | 20.00 | 2 | 28.0 | 26.0 | 8.00 | 110.00 | 20.00 | C | 1 | 1.7 | 0.8 | 0.23 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D20-2-W20-08C | 20.00 | 2 | 28.0 | 26.0 | 8.00 | 90.00 | 20.00 | W | 1 | 1.7 | 0.8 | 0.19 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D20-3-C20-08 | 20.00 | 3 | 28.0 | 26.0 | 8.00 | 110.00 | 20.00 | C | 0 | 1.7 | 0.8 | 0.25 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D20-3-C20-08C | 20.00 | 3 | 28.0 | 26.0 | 8.00 | 110.00 | 20.00 | C | 1 | 1.7 | 0.8 | 0.23 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D20-3-W20-08 | 20.00 | 3 | 28.0 | 26.0 | 8.00 | 90.00 | 20.00 | W | 0 | 1.7 | 0.8 | 0.20 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D20-3-W20-08C | 20.00 | 3 | 28.0 | 26.0 | 8.00 | 90.00 | 20.00 | W | 1 | 1.7 | 0.8 | 0.18 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D22-3-C20-08C | 22.00 | 3 | 28.0 | 30.0 | 8.00 | 110.00 | 20.00 | C | 1 | - | - | 0.24 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D25-3-C24-08B | 25.00 | 3 | 41.0 | 40.0 | 8.00 | 200.00 | 24.00 | C | 1 | - | - | 0.61 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D25-3-C25-08C | 25.00 | 3 | 28.0 | 26.0 | 8.00 | 120.00 | 25.00 | C | 1 | - | - | 0.39 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D25-3-W25-08C | 25.00 | 3 | 28.0 | 26.0 | 8.00 | 95.00 | 25.00 | W | 1 | - | - | 0.30 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D25-4-C25-08 | 25.00 | 4 | 28.0 | 26.0 | 8.00 | 120.00 | 25.00 | C | 0 | - | - | 0.43 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D25-4-C25-08C | 25.00 | 4 | 28.0 | 26.0 | 8.00 | 120.00 | 25.00 | C | 1 | - | - | 0.39 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D25-4-W25-08 | 25.00 | 4 | 28.0 | 26.0 | 8.00 | 95.00 | 25.00 | W | 0 | - | - | 0.33 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D25-4-W25-08C | 25.00 | 4 | 28.0 | 26.0 | 8.00 | 95.00 | 25.00 | W | 1 | - | - | 0.30 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D32-3-C32-08C | 32.00 | 3 | 32.0 | 30.0 | 8.00 | 130.00 | 32.00 | C | 1 | - | - | 0.72 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D32-3-W32-08C | 32.00 | 3 | 32.0 | 30.0 | 8.00 | 110.00 | 32.00 | W | 1 | - | - | 0.60 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D32-4-C32-08B | 32.00 | 4 | 32.0 | 30.0 | 8.00 | 200.00 | 32.00 | C | 1 | - | - | 1.14 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D32-5-C32-08C | 32.00 | 5 | 32.0 | 30.0 | 8.00 | 130.00 | 32.00 | C | 1 | - | - | 0.73 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D32-5-W32-08C | 32.00 | 5 | 32.0 | 30.0 | 8.00 | 110.00 | 32.00 | W | 1 | - | - | 0.60 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D40-4-C32-08C | 40.00 | 4 | - | 30.0 | 8.00 | 130.00 | 32.00 | C | 1 | - | - | 0.81 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D40-6-C32-08C | 40.00 | 6 | - | 30.0 | 8.00 | 130.00 | 32.00 | C | 1 | - | - | 0.82 | SR 10502813-HG-M | IP-7/51 |
| T490 ELN D40-6-W32-08C | 40.00 | 6 | - | 30.0 | 8.00 | 110.00 | 32.00 | W | 1 | - | - | 0.69 | SR 10502813-HG-M | IP-7/51 |
- "B" suffix with long cylindrical shank which may be shortened.
- For user guide see pages 542-548
(1) Number of inserts (2) C-Cylindrical, W-Weldon (3) 0 - Without coolant supply, 1 - With coolant supply (4) Maximum ramping angle - valid only with T490 LNHT 080404PNR-RD inserts (5) Maximum ramping angle - valid only with T490 LNMT 080404PNR-RD inserts
For inserts, see pages: T490 LNAR-P (480) T490 LNMT/LNHT 0804 (476)
| T490 ELN-M-08 90° Endmills with a FLEXFIT Threaded Adaptation Carrying | DC | DRVS | DCONMS THSZMS | Rd° |
| Tangentially Clamped Inserts | APMX | LU LF OAL |
| Designation | DC | CICT(1) | APMX | DCONMS | LU | LF | OAL | THSZMS | DRVS(2) | RMPX°(3) | RMPX°2(4) | Insert | TQ3(5) | kg |
| T490 ELN D16-2-M10 | 16.00 | 2 | 8.00 | 18.00 | 22.0 | 30.00 | 50.00 | M10 | 12.7 | 2.0 | 1.1 | T490 LN.. 08 | 29 | 0.04 |
| T490 ELN D20-3-M10 | 20.00 | 3 | 8.00 | 18.70 | - | 30.00 | 50.00 | M10 | 15.0 | 1.7 | 0.8 | T490 LN.. 08 | 29 | 0.06 |
| T490 ELN D25-3-M12 | 25.00 | 3 | 8.00 | 21.00 | - | 28.00 | 50.00 | M12 | 17.0 | - | - | T490 LN.. 08 | 33 | 0.08 |
| T490 ELN D25-4-M12 | 25.00 | 4 | 8.00 | 21.00 | - | 28.00 | 50.00 | M12 | 17.0 | - | - | T490 LN.. 08 | 33 | 0.08 |
| T490 ELN D32-3-M16-13 | 32.00 | 3 | 12.50 | 29.00 | - | 45.00 | 70.00 | M16 | 25.0 | - | - | T490 LN.. 13 | 40 | 0.22 |
| T490 ELN D32-5-M16 | 32.00 | 5 | 8.00 | 29.00 | - | 30.00 | 55.00 | M16 | 25.0 | - | - | T490 LN.. 08 | 40 | 0.16 |
- For adaptation see page 44
- For user guide see pages 542-548
- When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and
threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the TQ_3 parameter (1) Number of inserts (2) Clamping wrench size (3) Maximum ramping angle - valid only with T490 LNHT 080404PNR-RD inserts (4) Maximum ramping angle - valid only with T490 LNMT 080404PNR-RD inserts (5) Tool tightening torque Nxm (lbfxin)
For inserts, see pages: T490 LNAR-P (480) T490 LNMT/LNHT 0804 (476)
For holders, see pages: BT-ODP (FLEXFIT) (314) C#-ODP (FLEXFIT) (314) CAB M-M (FLEXFIT) (312) DIN69871-ODP (315) ER-ODP (315)