Каталог Iscar концевые фрезы со сменными пластинами 2022 - страница 19
Навигация
Каталог Iscar токарный инструмент
Инструменты для обработки отверстий Iscar 2026
Каталог Iscar токарные пластины ISO 2022
Каталог Iscar высокоточные развертки и метчики 2022
Каталог Iscar крепление инструмента
Каталог Iscar сверла ружейные и для глубокого сверления 2022
| HP E90AN-07 | DC | DCONMS | Rd° | ||||||||||
| Endmills with HELIPLUS | |||||||||||||
| HP ANKT 0702.. Inserts | LH LU APMX | OAL | |||||||||||
| Designation | DC | CICT(2) | LH | LU | OAL | APMX | DCONMS | Shank(3) | RMPX°(4) | RMPX°2(5) CSP(6) | kg | ||
| HP E90AN-D10-1-C10-07-C | 10.00 | 1 | 20.0 | 18.0 | 80.00 | 7.70 | 10.00 | C | 2.5 | - 1 | 0.04 | SR 34-533 | T-6/51 |
| HP E90AN-D12-2-C12-07-C | 12.00 | 2 | 18.0 | 16.2 | 80.00 | 7.70 | 12.00 | C | 2.7 | 3.5 1 | 0.06 | SR 34-533/L/HG | T-6/51 |
| HP E90AN-D14-2-C14-07-C | 14.00 | 2 | 18.0 | 16.5 | 80.00 | 7.70 | 14.00 | C | 3.2 | 4.2 1 | 0.08 | SR 34-533/L/HG | T-6/51 |
| HP E90AN-D16-3-C15-07-C-B(1) | 16.00 | 3 | 26.0 | 24.5 | 150.00 | 7.70 | 15.00 | C | 3.2 | 6.0 1 | 0.17 | SR 34-533/L/HG | T-6/51 |
| HP E90AN-D16-3-C16-07-C | 16.00 | 3 | 26.0 | 24.5 | 90.00 | 7.70 | 16.00 | C | 3.2 | 6.0 1 | 0.11 | SR 34-533/L/HG | T-6/51 |
| HP E90AN-D16-3-W16-07 | 16.00 | 3 | 21.0 | 18.5 | 85.00 | 7.70 | 16.00 | W | 3.2 | 6.0 0 | 0.12 | SR 34-533/L/HG | T-6/51 |
| HP E90AN-D16-4-C16-07-C | 16.00 | 4 | 26.0 | 24.5 | 90.00 | 7.70 | 16.00 | C | 3.2 | 6.0 1 | 0.11 | SR 34-533/L/HG | T-6/51 |
| HP E90AN-D16-4-W16-07 | 16.00 | 4 | 20.0 | 18.5 | 85.00 | 7.70 | 16.00 | W | 3.2 | 6.0 0 | 0.12 | SR 34-533/L/HG | T-6/51 |
| HP E90AN-D20-4-C19-07-C-B(1) | 20.00 | 4 | 22.0 | 20.5 | 160.00 | 7.70 | 19.00 | C | 2.4 | 4.5 1 | 0.31 | SR 34-533/L/HG | T-6/51 |
| HP E90AN-D20-4-C20-07-C | 20.00 | 4 | 22.0 | 20.5 | 110.00 | 7.70 | 20.00 | C | 2.4 | 4.5 1 | 0.23 | SR 34-533/L/HG | T-6/51 |
| HP E90AN-D20-5-C20-07-C | 20.00 | 5 | 22.0 | 20.5 | 110.00 | 7.70 | 20.00 | C | 2.4 | 4.5 1 | 0.23 | SR 34-533/L/HG | T-6/51 |
| HP E90AN-D20-5-W20-07 | 20.00 | 5 | 22.0 | 20.5 | 90.00 | 7.70 | 20.00 | W | 2.4 | 4.5 0 | 0.20 | SR 34-533/L/HG | T-6/51 |
| HP E90AN-D25-5-C20-07-C | 25.00 | 5 | 24.0 | - | 120.00 | 7.70 | 20.00 | C | 2.0 | 3.0 1 | 0.28 | SR 34-533/L/HG | T-6/51 |
| HP E90AN-D25-7-C20-07-C | 25.00 | 7 | 24.0 | - | 120.00 | 7.70 | 20.00 | C | 2.0 | 3.0 1 | 0.27 | SR 34-533/L/HG | T-6/51 |
| HP E90AN-D32-8-C25-07-C | 32.00 | 8 | 30.0 | - | 130.00 | 7.70 | 25.00 | C | 1.4 | 2.5 1 | 0.48 | SR 34-533/L/HG | T-6/51 |
- Insert tightening torque: 62 Nxcm
- For user guide see pages 542-548
(1) "B" suffix - cylindrical shank which may be shortened. (2) Number of inserts (3) C-Cylindrical, W-Weldon (4) Maximum ramping angle (5) Values only for HP ANKT 0702R12T-FF insert (6) 0 - Without coolant supply, 1 - With coolant supply
For inserts, see pages: HP ANCR 0702PNFR (444) HP ANKT 0702...-FF (445) HP ANKT/ANCT 0702..PN-R/PNTR (444) HP ANKW 070204PNTR (444)
DRVS Rd°
HP E90AN-M-07
90° Endmills with a FLEXFIT
| Threaded Adaptation | DC | THSZMS | DCONMS | ||
| Carrying HELIPLUS HP | |||||
| ANKT 0702.. Inserts | APMX | ||||
| LF | |||||
| OAL |
| Designation | DC | CICT(1) | THSZMS OAL | LF | APMX DCONMS RMPX°(2) | RMPX°_2(3) | DRVS(5) | TQ_3(4) | kg | |||||
| HP E90AN-D25-5-M12 | 25.00 | 5 | M12 | 57.00 | 35.00 | 7.70 | 21.00 | 2.0 | 3.0 | 19.0 | 33 | 0.09 SR 34-533/L/HG | T-6/51 |
- Insert tightening torque: 62 Nxcm
- For adaptation see page 44
- For user guide see pages 542-548
- When mounting items with FLEXFIT threaded adaptation to their
holders, the mating surfaces and threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the TQ_3 parameter (1) Number of inserts (2) Maximum ramping angle (3) Values only for HP ANKT 0702R12T-FF insert (4) Torque key size (5) Tool tightening torque Nxm (lbfxin)
For inserts, see pages: HP ANCR 0702PNFR (444) HP ANKT 0702...-FF (445) HP ANKT/ANCT 0702..PN-R/PNTR (444) HP ANKW 070204PNTR (444)
For holders, see pages: BT-ODP (FLEXFIT) (314) C#-ODP (FLEXFIT) (314) CAB M-M (FLEXFIT) (312) DIN69871-ODP (315) ER-ODP (315)
- HSK A-ODP (FLEXFIT) (316)
- S M (312)
- S M-C-H (312)
- S M-CF (313)