Каталог Iscar дисковые фрезы и фрезерные пластины 2022 - страница 53

SLOTTING & SLITTING CUTTERS
GFT-J
Thin Parting, Grooving
and Slitting Single-Ended
Inserts for Soft Materials
CW
RE

Dimensions Tough 1 Hard Recommended Machining Data

f groove


IC1028

IC1008
Designation CW RE (mm/rev)
GFT 0.6J-0.1 0.60 0.10 • • 0.03-0.05
GFT 0.8J-0.1 0.80 0.10 • • 0.03-0.07
GFT 1.0J-0.1 1.00 0.10 • • 0.03-0.09
GFT 1.2J-0.14 1.20 0.14 • • 0.03-0.10
GFT 1.6J-0.16 1.60 0.16 • • 0.03-0.12
For tools, see pages: • SGST (368)


OAL CW
SGSF-W DC
LH CDX
Grooving and Slitting Cutters
with Integral Weldon Shanks
DCONMS
THUB
OHX

Designation CWN(2) CWX(3) DC DCONMS CDX(4) NOF(5) THUB LH(6) OHX(7) OAL MIID(8)
SGSF 32-1.6-W16 1.50 1.79 32.00 16.00 7.00 3 1.32 20.0 49.0 100.00 GSFN 1.6 ESG 1.4-2
SGSF 32-2-W16 (1) 1.80 2.69 32.00 16.00 7.00 3 1.62 20.0 49.0 100.00 GSFN 2 ESG 1.4-2
SGSF 40-1.6-W16 1.50 1.79 40.00 16.00 11.00 4 1.32 34.0 63.0 100.00 GSFN 1.6 ESG 1.4-2
SGSF 40-2-W16 (1) 1.80 2.69 40.00 16.00 11.00 4 1.62 34.0 63.0 100.00 GSFN 2 ESG 1.4-2
• For user guide, see pages 377-383
(1) Standard GSFN 2.4 mm inserts are not suitable for this tool; for suitable tool, see specific pocket size.
(2) Minimum cutting width
(3) Maximum cutting width
(4) Cutting depth maximum
(5) Number of flutes
(6) Minimum overhang range
(7) Maximum overhang range
(8) Master insert identification
For inserts, see pages: GSFN (373) • GSFU (373)


369