Каталог Iscar дисковые фрезы и фрезерные пластины 2022 - страница 44
Навигация
Каталог Iscar крепление инструмента
Каталог Iscar инструмент для обработки отверстий
Каталог Iscar резьбонарезные фрезы
Каталог Iscar инструмента для сверления
Каталог Iscar решения для глубокого сверления
SDN-CAPM15 DHUB
Full Slot Adjustable Slotting CDX DCON
Cutters with Cartridges Carrying
CW OAL
LNAT 1506...-PM Inserts
DC
| Designation | DC | OAL | CWN(1) | CWX(2) | CDX(3) | CICT(4) | ZEFP | DHUB | DCON | kg |
| SDN D125-1925-40-CAPM15 | 125.00 | 26.00 | 18.90 | 25.60 | 32.50 | 8 | 4 | 56.00 | 40.00 | 1.30 |
| SDN D160-1925-40-CAPM15 | 160.00 | 26.00 | 18.90 | 25.60 | 48.50 | 10 | 5 | 56.00 | 40.00 | 1.90 |
| SDN D250-1925-60-CAPM15 | 250.00 | 26.00 | 18.90 | 25.60 | 79.00 | 16 | 8 | 85.00 | 60.00 | 4.81 |
- Each cutter can be changed into full slot, bottom or top milling configuration
- Use A type cartridges for inserts with 0.8-1.6 mm radii, B type cartridges for inserts with
2.5-3.2 mm radii and C type cartridges for insertswith 4.0 mm radius
- Each cutter features two keyways.
- To reduce vibration, it is recommended to assemble gang-mills with alternating keyway position.
- For cartridge details, see page 363
(1) Minimum cutting width The cutter will be set to the minimum width range, unless a specific width is requested by the user (2) Maximum cutting width (3) Cutting depth maximum (4) Number of inserts
For inserts, see pages: LNAT 1506-PM (490)
Spare Parts
Designation
SDN-CAPM15 CA90 1928-R/L-PM15-A CA90 1928-R/L-PM15-B* CA90 1928-R/L-PM15-C*
* Optional, should be ordered separately
SDN DHUB Full Slot Disk Type Slotting Cutters DCONMS OAL CW CDX DC
| Designation | DC | CW | CICT(1) | ZEFP | CDX(2) | DHUB | DCONMS | OAL |
| SDN D080-08-27-06 | 80.00 | 8.00 | 12 | 6 | 17.00 | 41.00 | 27.00 | 12.00 |
| SDN D100-08-32-06 | 100.00 | 8.00 | 14 | 7 | 24.00 | 47.00 | 32.00 | 12.00 |
| SDN D100-10-32-06 | 100.00 | 10.00 | 14 | 7 | 24.00 | 47.00 | 32.00 | 14.00 |
| SDN D125-12-40-10 | 125.00 | 12.00 | 12 | 6 | 33.00 | 55.00 | 40.00 | 16.00 |
| SDN D160-12-40-10 | 160.00 | 12.00 | 14 | 7 | 50.00 | 55.00 | 40.00 | 16.00 |
| SDN D160-16-40-10 | 160.00 | 16.00 | 14 | 7 | 50.00 | 55.00 | 40.00 | 20.00 |
| SDN D160-16-40-12 | 160.00 | 16.00 | 12 | 6 | 50.00 | 55.00 | 40.00 | 20.00 |
| SDN D200-18-50-12 | 200.00 | 18.00 | 14 | 7 | 50.00 | 69.00 | 50.00 | 24.00 |
| SDN D200-20-50-12 | 200.00 | 20.00 | 14 | 7 | 63.00 | 69.00 | 50.00 | 26.00 |
- For user guide, see pages 377-383
(1) Number of inserts (2) Cutting depth maximum
For inserts, see pages: QDCT-PDN (497) QDMT 1205..PDTN-M (498) QOMT-HQ (494) QPMT 100408PDTN (495) XOMT-HQ (494)
- XPMT-HQ (496)
Spare Parts
Designation
| SDN D080-08-27-06 | SR 34-514 | T-7/51 | |||
| SDN D100-08-32-06 | SR 34-514 | T-7/51 | |||
| SDN D100-10-32-06 | SR 34-514 | T-7/51 | |||
| SDN D125-12-40-10 | SR 14-544/S | T-15/51 | |||
| SDN D160-12-40-10 | SR 14-544/S | T-15/51 | |||
| SDN D160-16-40-10 | SR 14-544/S | T-15/51 | |||
| SDN D160-16-40-12 | SR 34-510 | PN 3-4 | BLD T15/M7 | SW6-T | |
| SDN D200-18-50-12 | SR 34-510 | PN 3-4 | BLD T15/M7 | SW6-T | |
| SDN D200-20-50-12 | SR 34-510 | PN 3-4 | BLD T15/M7 | SW6-T |