Каталог Iscar дисковые фрезы и фрезерные пластины 2022 - страница 43
Навигация
Каталог Iscar крепление инструмента
Каталог Iscar инструмент для обработки отверстий
Каталог Iscar резьбонарезные фрезы
Каталог Iscar инструмента для сверления
Каталог Iscar решения для глубокого сверления
SDN-CALN11 DHUB
Full Slot Disk Type Slotting DCONMS CDX
OAL CW
Carrying Tangentially Mounted
LN.. 1106.. Inserts
DC
| Designation | CWN(1) | CWX(2) | CDX(3) | DC | DHUB | DCONMS | CICT(4) | ZEFP | OAL | kg |
| SDN D100-1419-27-CALN11 | 14.00 | 19.50 | 26.80 | 100.00 | 42.00 | 27.00 | 6 | 3 | 20.00 | 0.58 |
| SDN D125-1419-40-CALN11 | 14.00 | 19.50 | 31.50 | 125.00 | 56.00 | 40.00 | 8 | 4 | 20.00 | 0.90 |
| SDN D160-1419-40-CALN11 | 14.00 | 19.50 | 48.00 | 160.00 | 56.00 | 40.00 | 10 | 5 | 22.00 | 1.51 |
| SDN D200-1419-50-CALN11 | 14.00 | 19.50 | 61.00 | 200.00 | 70.00 | 50.00 | 14 | 7 | 22.00 | 2.38 |
| SDN D250-1419-60-CALN11 | 14.00 | 19.50 | 78.00 | 250.00 | 85.00 | 60.00 | 16 | 8 | 26.00 | 3.88 |
- Each cutter body can be changed into full slot, bottom or top milling configuration by mounting the cartridges accordingly
- Half of the inserts are used on right-hand cartridges and half on left-hand cartridges
- Gang-mill assembly SDN and left-hand SSB cutters feature two keyways
- To reduce vibration, it is recommended to assemble gang-mills with alternating keyway position.
- For cartridge details, see page 363
(1) Minimum cutting width The cutter will be set to the minimum width range, unless a specific width is requested by the user (2) Maximum cutting width (3) Cutting depth maximum (4) Number of inserts
For inserts, see pages: LNAR 1106 (482) LNHT 1106 PN-N HT (482) LNHT 1106 PN-R HT (481) LNKX/LNMT 1106 (481)
Spare Parts
Designation
SDN-CALN11 CA90 1419-R/L-LN11
SDN-CALN13
DHUB
Full Slot Adjustable Slotting CDX DCON
Cutters with Cartridges Carrying
T490 LNHT 1306PNTR/L Inserts CW OAL DC
| Designation | DC | OAL | CWN(1) | CWX (2) | CDX(3) | CICT(4) | ZEFP | DHUB | DCON | kg |
| SDN D125-1723-40-CALN13 | 126.00 | 26.00 | 17.50 | 23.00 | 32.00 | 8 | 4 | 56.00 | 40.00 | 1.13 |
| SDN D160-1723-40-CALN13 | 161.00 | 26.00 | 17.50 | 23.00 | 49.50 | 10 | 5 | 56.00 | 40.00 | 1.90 |
| SDN D200-1723-50-CALN13 | 201.00 | 26.00 | 17.50 | 23.00 | 61.00 | 14 | 7 | 70.00 | 50.00 | 3.01 |
| SDN D250-1723-50-CALN13 | 251.00 | 26.00 | 17.50 | 23.00 | 86.00 | 16 | 8 | 70.00 | 50.00 | 4.82 |
| SDN D250-1723-60-CALN13 | 251.00 | 26.00 | 17.50 | 23.00 | 78.00 | 16 | 8 | 85.00 | 60.00 | 4.83 |
- Each cutter body can be changed into full slot, bottom or top milling configuration by mounting the cartridges accordingly
- Half of the inserts are used on right-hand cartridges and half on left-hand cartridges
- Gang-mill assembly SDN and left-hand SSB cutters feature two keyways
- To reduce vibration, it is recommended to assemble gang-mills with alternating keyway position.
- For cartridge details, see page 363
(1) Minimum cutting width The cutter will be set to the minimum width range, unless a specific width is requested by the user (2) Maximum cutting width (3) Cutting depth maximum (4) Number of inserts
For inserts, see pages: T490 LNMT/LNHT/LNAR 1306 (478)
Nut
Cartridge Screw
T490 LNHT 1306...Insert
Right Hand Cartridge
Insert Screw
Spare Parts
Designation
SDN-CALN13 CA90 1723-R/L-T490-13