Каталог Iscar дисковые фрезы и фрезерные пластины 2022 - страница 204
Навигация
Каталог Iscar крепление инструмента
Каталог Iscar инструмент для обработки отверстий
Каталог Iscar резьбонарезные фрезы
Каталог Iscar инструмента для сверления
Каталог Iscar решения для глубокого сверления
| FQ8 SZMU ouble-Sided Square serts with 8 Cutting Edges r High Feed Milling | L/IC RE | S S1 | Rd° | |||
| Dimensions | Tough | 1 H | ard | |||
| Designation | L | S S1 | RE | IC882 IC830 | IC808 | IC810 |
| FFQ8 SZMU 120520HP | 12.00 | 5.85 6.50 | 2.00 | • • | • | |
| FFQ8 SZMU 120520T | 12.00 | 5.85 6.50 | 2.00 | • | • | • |
- For side plunging, the initial cutting feed is 0.1 mm/t
- T- for steel, ferritic and martensitic stainless steel, cast iron and hardened steel
- HP - for austenitic stainless steel and high temperature alloys
For tools, see pages: FFQ8-12 (303) MFQ8-12 (304)
Averaged Cutting Data for FFQ8 Fast Feed Cutters
| W | orkpiece | material | Typic | al | Cutting | Fa cut | st feed ters(FF) | Modera | te feed(MF) | ||||
| ISO class | ISCAR | represen | tstive | speed | D.O.C | Feed | D.O.C | Feed | |||||
| DIN/ ISO 513 | Description | mat. group | Hardness HB | AISI/SAE/ ASTM | DIN W.-Nr. | Insert type | Carbide grade | vc [m/min] | ap [mm] | fz [mm/tooth] | ap [mm] | fz [mm/tooth] | Coolant |
| Non-alloy steel | 1-5 | 130-180 | 1020 | 1.0402 | IC808 IC830 | 150-220 140-200 | 0.40-1.5 0.40-1.5 | 0.20-1.0 0.20-1.0 | Dry Dry/Wet | ||||
| 6-8 | 260-300 | 4340 | 1.6582 | IC808 IC830 | 140-200 120-180 | 0.40-1.5 0.40-1.5 | 0.20-1.0 0.20-1.0 | Dry/Wet Dry/Wet | |||||
| Low alloy steel | IC808 | 130-180 | 0.40-1.5 | 0.20-1.0 | Dry | ||||||||
| P | 9 | 35-42 HRC | 3135 | 1.5710 | T | IC830 | 120-160 | 0.5-1.5 | 0.40-1.5 | 0.5-3.0 | 0.20-1.0 | Dry/Wet | |
| High alloy steel | 10-11 | 200-220 | H13 | 1.2344 | IC808 IC830 | 120-170 100-150 | 0.40-1.5 0.40-1.5 | 0.20-1.0 0.20-1.0 | Dry Dry/Wet | ||||
| Ferritic/ | IC808 | 110-160 | 0.40-1.5 | 0.20-1.0 | Dry | ||||||||
| martensitic stainless steel | 12-13 | 200 | 420 | 1.4021 | IC830 | 100-150 | 0.40-1.5 | 0.20-1.0 | Dry/Wet | ||||
| Austenitic | IC882 | 70-130 | 0.20-0.8 | 0.20-0.5 | |||||||||
| M | stainless steel | 14 | 200 | 304L | 1.4306 | HP | IC808 IC830 | 100-160 80-140 | 0.5-1.5 | 0.20-0.8 0.20-0.8 | 0.5-3.0 | 0.20-0.5 0.20-0.5 | Wet |
| Grey cast iron | 15-16 | 250 | Class 40 | 0.6025 (GG25) | IC810 | 150-220 | 0.40-1.5 | 0.40-1.0 | |||||
| K | Nodular | Class | 07050 | T | 0.5-1.5 | 0.5-3.0 | Dry | ||||||
| cast iron | 17-18 | 200 | 65-45-12 | . (GGG50) | IC810 | 120-200 | 0.40-1.5 | 0.40-1.0 | |||||
| IC882 | 40-60 | 0.20-0.8 | 0.20-0.5 | ||||||||||
| 31-32 | 220 | 330 | 1.4864 | IC808 | 40-80 | 0.20-0.8 | 0.20-0.5 | ||||||
| High | IC830 | 40-75 | 0.20-0.8 | 0.20-0.5 | |||||||||
| tt | IC882 | 20-30 | 0.20-0.8 | 0.20-0.5 | |||||||||
| S | emperaure | 33-35 | 340 | Inconel 718 | 2.4668 | HP | IC808 | 25-40 | 0.5-1.5 | 0.20-0.8 | 0.5-3.0 | 0.20-0.5 | Wet |
| alloys and | IC830 | 25-35 | 0.20-0.8 | 0.20-0.5 | |||||||||
| titanium alloys | 30-32 | AMS | IC882 | 30-50 | 0.20-0.8 | 0.20-0.5 | |||||||
| 36-37 | 3.7165 | IC808 | 40-60 | 0.20-0.8 | 0.20-0.5 | ||||||||
| HRC | R56400 | IC830 | 35-55 | 0.20-0.8 | 0.20-0.5 | ||||||||
| H | Hardened steel | 38 | 45-49 HRC | HARDOX 4 | 50 plate | T | IC808 | 50-75 | 0.5-1.5 | 0.20-0.50 | 0.5-3.0 | 0.20-0.50 | Dry |
* ISCAR material group in accordance with VDI 3323 standard ** Quenched and tempered For machining in unstable conditions, the recommended cutting data should be reduced by 20-30%