Каталог Ingersoll новинки 2021 - страница 89

Предыдущая страница Следующая страница

Навигация

NEW END MILL TIPS WITH 1.5XD FLUTE LENGTH

  • 4-6 Flute Roughing Mills equipped with serrations to promote accelerated Feed rates and better chip evacuation with airblast
  • 4 Flute Rough & Finish Mills equipped with variable pitch to reduce harmonic chatter
  • 7-9 Flute Finish Mills equipped different helix and variable pitch to diffuse vibration
  • Best suited with Weldon Shank for utmost rigidity and holding
  • Tips repeat within +/-.0005” and can be indexed on the machine in seconds
  • Feature variations can be quoted

SERIES 47D_RQ 90º VARIABLE PITCH END MILL

4 FLUTE, 46' HELIX, CENTER-CUTTING, 1.5XD FLUTE

ShoulderFacingSlabbingRampingCorkscrewPocketing
REAPMXCCMS

DC DHUB (e8) LF 90°KAPR

Part NumberDC Cutting DiameterRE/CHW Corner Radius/ChamferAPMX Depth of Cut Max.LF Functional LengthZEFF Effective FlutesFHA Flute Helix AngleCCMS Connection CodeDHUB Hub DiameterRMPX Ramp Angle Max.
47D-3146TQRQ010.3120.015 R0.4690.709446.5Chip Surfer T050.30090
47D-3756T6RQ010.3750.015 R0.5630.866446.5Chip Surfer T060.36690
47D-5075T8RQ010.5000.015 R0.7501.063446.5Chip Surfer T080.48890
47D-6293TRRQ010.6250.015 R0.9381.319446.5Chip Surfer T100.60290
47D-7511TSRQ030.7500.031 R1.1251.614446.5Chip Surfer T120.72690
47D-1015TURQ031.0000.031 R1.5002.067446.5ChipSurfer T150.94190

When assembling, be sure tip is seated firmly on shank with no gap. Tightening Torque: T05=60in*lbs, T06=90in*lbs, T08=130in*lbs, T10=250in*lbs, T12=250in*lbs, T15=350in*lbs. No lubricant on adaption. Wrenches sold separately.

47D HARDWARE

OPTIONALOPTIONAL
Thin WrenchTorque Wrench
47D-3146TQRQ01WS-0043DT-60-06
47D-3756T6RQ01WS-0029DT-90-08
47D-5075T8RQ01WS-0030DT-130-10
47D-6293TRRQ01WS-0044DT-250-13
47D-7511TSRQ03WS-0059DT-250-16
47D-1015TURQ03WS-0061DT-350-20