Режущие и зажимные инструменты Hoffmann Group 2026 - страница 1193

GBP 57 NC8 NC high-pressure vice Compact size: Optimum ratio between clamping range and overall length. The Thread Attachment holes clamping force can be pre-set without using tools: in 11 steps: Jaw width 90 mm, in for HD jaws for stepped inserts 4 steps: Jaw width 125 / 160 / 200 mm. Particularly rigid base body of GJS-60, top and No. 362390 – 362600 No. 361950 to bottom faces ground; pairing accuracy 0.02 mm. Click quick- 361970 change system Feature: Fully enclosed low-maintenance nitrided spindle! Thread M8 (see No. 361950/1960/1970), only size 90–-160. ■ Increased service reliability. for a workpiece ■ Optimised swarf protection. stop Force pre-setting ■ Minimised cleaning requirement. a without the use of tools ble in Size 90–125MX – With 25H6 M10 holes at 200 mm pitch for zero-point clamping l s o a vaila ersion. system. A ulic v hydra Upper face Size 200 – Base body same as size 160. induction hardened Size H200 – Heavy Duty for very heavy machining. and ground. Application: Can be used horizontally or laterally, since the side faces are ground to an accuracy of -0.05 mm. Supplied with: 2 stepped jaws (= standard!), 1 crank handle, 4 table clamps. Optional extras: Size 90–125LX – ■ Clamping stud No. 360025 - 25 M10. Size 125M–125LX – ■ Adapter plates for quick jaw change Xtric No. 361293;361294 size 125. ■ Adapter plates No. 361297; 361298 size 125. Size 125MX; 125LX – Faces ground on the side ■ Front jaws No. 361140 – 361151. Note: ■ Dimensions/jaws interface NC 8 identical to the Allmatic TC / LC. 36 0405 ■ NC 8 (No. 360405) supersedes the products LC (No. 360500) and TC (No. 360400). ■ Sizes 125 MX and 125 LX are supplied with jaws No. 361295 125 and No. 361296 125. Proven low-maintenance high-pressure spindles Size 90; H200 – ■ No end face holes for extensions included! with constant pressure level due to low-wear fully mechanical power intensifier. No decline of clamping force. L Type 90 125M 125MX 125L 125LX 160 200 H200 r 36 0405 34A NC8 NC high pressure vice eShop eShop eShop eShop eShop eShop (eShop) (eShop) c l m n Clamping force up to maximum kN 28 40 40 40 40 60 60 80 B1 a Weight kg 15 35 35 43 43 56 60 85 L mm 339 483 483 615 615 615 615 615 b a mm 283 398 398 530 530 530 530 530 h B1 −0.05 mm 90 126 126 126 126 164 164 202 b mm 0 – 126 0 – 182 0 – 182 0 – 314 0 – 314 0 – 246 0 – 246 0 – 246 t c −0.02 mm 80 100 100 100 100 115 115 140 d d mm 91 – 217 131 – 313 131 – 313 87 – 445 87 – 445 189 – 435 189 – 435 189 – 435 h mm 34 39.5 39.5 39.5 39.5 49.8 60 60 l H7 mm 20 m mm 112 180 180 278 278 234 234 234 n H7 mm 20 r ±0.015 mm 73 118 118 216 216 164 164 164 t mm 97 144 144 144 144 164 164 164 Example: No. 36 0405 Colour code for suitable accessories with 36 0420 Extensions ​ Suitable for: NC 8 and Titan. Supplied with: 2 table clamps and connecting screws. for type 125 160 36 0420 36 0420 34A Vice base extension eShop eShop d mm 492 677 L mm 659 857 suitable for colour code ​ Accessories ​ Supplied with: 4 screws, plain washers, 4 T-nuts, 2 tenons. 36 0530 Table T-slot size mm 12 14 16 18 22 36 0530 34A Alignment and fixing set eShop eShop eShop eShop (eShop) for type 36 0406 90 125-200 125/200 36 34A 34A Angled gear drive (eShop) eShop – 36 0800 36 0800 Spare crank – – eShop 36 0406 suitable for colour code 60 mm Application: For bolting on to the hand crank where access is difficult. 36 0850 Hand crank extension eShop 34A 36 0850 Colour code: NC8 TC Titan HiPo LC LC-GARANT 1193