Производственная мебель и системы хранения Hoffmann Group 2026 - страница 149

GBP 57 Floor anchoring for support legs ​ Zn Fastening for floor anchoring of support legs. Prevents the workbench from tipping. Suitable for: Support legs No. 927000, No. 927040, No. 927062 – 927068, No. 972180, No. 972150 – 972152, Vario workbenches. Supplied with: Two floor anchorings, suitable for one support leg. Note: It is essential that workbenches are secured against tipping. 92 Type 2 92 7136 9GG Floor anchoring for support legs eShop Width mm 110 Depth mm 110 Application example Thickness mm 4 Rear panel / storage shelf ​ 100 kg Rear panel or storage shelf of folded sheet metal. For fitting between 2 support legs. Installation as a rear panel provides a modesty board and additional stabilisation. The stated distributed load capacity is applicable when installed as a storage shelf. Suitable for: Support legs No. 927000. 92 7140 Size 1000 – Corner support leg No. 927112. Colour: Light grey RAL 7035, powder-coated. Supplied with: Fastening material. Note: In order to use the full depth of the workbench as a storage shelf, the two-part storage shelf must be installed. If a storage shelf is installed without a rear panel, additional stabilising plates No. 927122 must be fitted. If fitted as a rear panel no stabilising plates are required. Not suitable for Ready-to-go workbenches. Application example with 4× No. 92 7140 suitable for worktop length mm 1000 1500 2000 Rear panel / storage shelf 92 7140 9GG eShop eShop eShop single-piece Rear panel / storage shelf 92 7142 9GG eShop eShop eShop two-piece Width mm 900 1400 1900 Depth mm 300 Load capacity, distributed kg 100 Application example with 2× No. 92 7142 Set of corner support leg and rear panel ​ Set of corner support leg and rear panels. Installation of rear panels provides modesty boards and additional stabilisation. Suitable for: Corner worktops No. 926302 – 926342. Colour: Light grey RAL 7035, powder-coated. Supplied with: Size 2 – Corner support leg No. 927112 size 1 and 2 rear panels No. 927140 size 1000. Fastening material. Application example Size 4 – Corner support leg No. 927112 size 1 and 4 rear panels No. 927140 size 1000. 92 7115_2 Fastening material. Note: Rear panel flush with the worktop at the back. The worktop cannot protrude. Type 2 4 92 7115 9GG Set of corner support leg and rear panels eShop eShop Suitable for: 800‑900 Application example Support leg size Workbench top depth 750 mm 92 7115_4 149