Каталог Tungaloy инструмент для автоматов швейцарского типа - страница 234

Предыдущая страница Следующая страница

Навигация

Depth of cut: ap (mm)Depth of cut: ap (mm)Depth of cut: ap (mm) Depth of cut: ap (mm) Feed: f (mm/rev) Feed: f (mm/rev)Feed: f (mm/rev) Feed: f (mm/rev) Chipbreaker Guide Profiling and undercutting DTR type (2 corners) Full radius type Standard feed and DoC STR type (1 corners) 5 Excellent chip control 4 Molded Molded and ground inserts available 3CW = 3 - 6 mm2 1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Ground Feed: f (mm/rev) Groove width: CW (mm) 6-24, 6-25 3 4 5 6 External External grooving and turning DTM type General purpose Standard feed and DoC (2 corners) 5 Internal 1st choice for grooving and 4 turning 3Suitable for light to medium2 Standard feed0.4 Face cutting 1 0.3 Excellent chip control in 0 0.2 machining steel, alloy steel, 0.1 0.2 0.3 0.4 0.5 0.6 Parting stainless steel, and heat- Feed: f (mm/rev) 0.1 Groove width: CW (mm) resistant alloy 3 4 5 6 0 3 4 5 6 6-22 CW = 3 - 6 mm Groove width: CW (mm) DTX type Multi-functional type Standard feed and DoC (2 corners) 4 Well balanced sharpnessand strength 3 Standard feed 0.4 Multi-functional insert 2 CW = 3 - 6 mm 1 0.3 0.2 0 0.1 0.2 0.3 0.4 0.1 Feed: f (mm/rev) Groove width: CW (mm) 0 3 4 5 6 6-23 3 4 5 6 Groove width: CW (mm) DTE type General purpose Standard feed and DoC (2 corners) 5 Unique chipbreaker makes 4 Standard feed chips shorter 3 0.4 Molded and ground insert 2 0.3 available 1 CW = 3 - 6 mm 0 0.2 0.1 0.2 0.3 0.4 0.5 0.6 Feed: f (mm/rev) 0.1 6-22, 6-23 Groove width: CW (mm)3 4 5 6 0 3 4 5 6Groove width: CW (mm) External grooving of hardened steel SGN-CBN type For hardened steel cutting Standard feed (1 corner) 0.1 Optimum cutting edge shape for 0.08 grooving of hardened steels High tolerance width for finishing 0.06 CW = 2 - 5 mm 0.04 （ CW = ±0.025 mm) 0.02 0 2 3 4 5 6-25 Groove width: CW (mm) 6-28