Каталог Tungaloy инструмент для автоматов швейцарского типа - страница 213

Предыдущая страница Следующая страница

Навигация

CWN- CWXCWN- WFHFCWM WFHF 3.2HBHHBH 3.2 WB BH BH WF 5.7 GradeInsertExt. ToolholderInt. ToolholderThreadingGroovingEndmillDrilling ToolTechnical Reference JSXXR/LPartingtoolholder, for Swiss lathes 1 LF LH HBL Right hand (R) shown. 2 Designation CWN CWX H B LF** LH** HF WF HBL** HBH Insert Torque* JSXXR/L1010X09 1 2 10 10 120 19.65 10 0.2 19 3 JX*G06...,12...,16...,20... 1.2 JSXXR/L1212F09 1 2 12 12 85 19.65 12 0.2 19 1.5 JX*G06...,12...,16...,20... 1.2 JSXXR/L1212X09 1 2 12 12 120 19.65 12 0.2 19 1.5 JX*G06...,12...,16...,20... 1.2 JSXXR/L1616X09 1 2 16 16 120 19.65 16 0.2 -JSXXR/L2020H0912202010022.5200.2-*Torque: Recommended clamping torque (N∙m)-JX*G06...,12...,16...,20...1.2-JX*G06...,12...,16...,20...1.23 **LF (Functional Length) LH (Head Length), and HBL (Head-Bottom offset Length) values shown above are true with JXPG16... insert. LF, LH, and HBL will all be 2 mm shorter than the above values with JX*G12... and JXPG20...inserts, and 4 mm shorter for JXPG06... insert. Use the right-hand insert (JX****R...) for a right-hand holder (JSXXR...); the left-hand insert (JX****L...) for a left-hand holder (JSXXL...). SPARE PARTSDesignation Clamping screw WrenchJSXXR...CSTC-4L100DLT-1008/5JSXXL...CSTC-4L100DRT-1008/5 4 JSXXR/L-SPartingtoolholder, for Swiss lathes (for sub spindle) 5 LH LF Right-hand LHLeft-hand 6 Designation CWN CWM H B LF** LH** HF WF HBH Insert Torque* JSXXR/L1010X09-S 1 2 10 10 120 26 10 0.2/5.5 3 JX*G06...,12...,16... 1.2 JSXXR/L1212F09-S 1 2 12 12 85 26 12 0.2/5.5 1.5 JX*G06...,12...,16... 1.2 JSXXR/L1212X09-S 1 2 12 12 120 30 12 0.2/5.5 1.5 JX*G06...,12...,16... 1.2 JSXXR/L1616X09-S 1 2 16 16 120 30 16 0.2/5.5 - JX*G06...,12...,16...,20... 1.2*Torque: Recommended clamping torque (N∙m)**LF (Functional Length) and LH (Head Length) values shown above are true with JXPG16... insert. LF and LH will be 2 mm shorter than the above values with JX*G12... insert,7 and 4 mm shorter for JXPG06... insert. LF, LH will all be 2 mm shorter with JXPG20... insert. ***JXPG20... insert will not fit. Use the right-hand insert (JX****R...) for a right-hand holder (JSXXR...); the left-hand insert (JX****L...) for a left-hand holder (JSXXL...). SPARE PARTS Designation Clamping screw Wrench JSXXR*****09-S CSTC-4L055DL T-1008/5JSXXL*****09-SCSTC-4L055DRT-1008/5 8 9 Referent pages : Inserts, Standard cutting conditions → 6-10 6-7