Каталог Sumitomo сверла и развертки - страница 117

Предыдущая страница Следующая страница

Навигация

SumiDrill SumiDrill WDX Type Eccentric Sleeve WDX Type Eccentric Sleeve WAS Type The Eccentric Sleeve WAS Type, exclusively designed for SumiDrill WDX Type, provides ±0.3 mm of hole size adjustment. DCB BDX DMM L4 L3 L2 LS ■ Body (WAS Type) (mm) Cat. No. Stock Shank Diameter Shank Diameter Diameter Shank Length Length Length Diameter Adjustment Range DCB DMM BDX LS L2 L3 L4 WAS 2025-48 D 20 25 33 43 5 32 5 + 0.3 to ‑ 0.2 2532-60 D 25 32 42 60 7 46 6 + 0.3 to ‑ 0.3 3240-70 D 32 40 55 70 7 57 6 + 0.3 to ‑ 0.3 4050-85 D 40 50 60 80 7 64 6 + 0.3 to ‑ 0.3 *Diameter Adjustment Range indicates the range of adjustment of the diameter. ■ Important Notes 1. The dial is for reference purposes. Always measure the actual drilling diameter and adjust accordingly. 2. Not usable with collet chuck type holders. Use a side-locking holder. 3. Use this product on high rigidity drilling processes .   This product is not recommended for deep hole drilling such as 5D and machining of material with low rigidity. ■ Uses (Diameter Adjustment Range) Procedure ձ Reference line WAS Type Installation Image J Adjust the dial on the sleeve Drilling to the reference line on the flange of the drill. Solid Special Indexable Reamer Brazed Others Procedure ճ Procedure ղ ＋ Drill set screw Adjustment hash marks − Loosely tighten the drill set Turn to a positive number to screw to keep the drill from moving. expand the hole, and to a negative number to decrease the hole. J95