Общий каталог SGS 2021 - страница 254

FRACTIONAL & METRIC Hi-PerCarb® 30° 124° 3 OAL LCF LS LU DC DCON 131N 5xD TOLERANCES (inch) FRACTIONAL & METRIC SERIES ≤.1181 DIAMETER DC = +.00008/+.00047 • Triple margin design inch & mm EDP NO. DCON = h6 improves hole stability CUTTING DECIMAL METRIC TAP SIZE SHANK OVERALL FLUTE CLEARED SHANK UNCOATED Ti-NAMITE-B and size control while DIAMETER EQUIV. EQUIV. REFERENCE DIAMETER LENGTH LENGTH LENGTH LENGTH (TiB2) >.1181–.2362 DIAMETER providing superior DC ONLY DCON OAL LCF LU LS DC = +.00016/+.00063 finish, roundness and 3,0 mm 0.1181cylindricity 6,0 66,0 28,0 23,0 36,0 65000 64800 DCON = h6 3,1 mm 0.1220• Self-stabilizing pyramid 6,0 66,0 28,0 23,0 36,0 65001 64801 >.2362–.3937 DIAMETER point design stabilizes 1/8 0.1250 3.18 6,0 66,0 28,0 23,0 36,0 55000 54800 DC = +.00024/+.00083 the drill on contact with 3,2 mm 0.1260the workpieceM3,5 X 0,35 6,0 66,0 28,0 23,0 36,0 65002 64802 DCON = h6 • Open flute structure 3,3 mm 0.1299 M4 X 0,7 6,0 66,0 28,0 23,0 36,0 65003 64803 >.3937–.7087 DIAMETER efficiently transports 3,4 mm 0.1339 6,0 66,0 28,0 23,0 36,0 65004 64804 DC = +.00028/+.00098 chips while maintainingstrength at high#290.1360 3.45 8-32,8-36 6,0 66,0 28,0 23,0 36,0 55001 54801 DCON = h6 feed rates 3,5 mm 0.1378 M4 X 0,5 6,0 66,0 28,0 23,0 36,0 65005 64805 >.7087–1.1811 DIAMETER • Sculpted gash allows 9/64 0.1406 3.57 6,0 66,0 28,0 23,0 36,0 55002 54802 DC = +.00031/+.00114 chips to easily flow awayfrom the drill center3,6 mm0.1417 M4 X 0,35 6,0 66,0 28,0 23,0 36,0 65006 64806 DCON = h6 • Recommended for 3,7 mm 0.1457 M4,5 X 0,75 6,0 66,0 28,0 23,0 36,0 65007 64807 materials ≤ 175 Bhn 3,8 mm 0.1496 10-24 6,0 74,0 36,0 29,0 36,0 65008 64808 TOLERANCES (mm) (≤ 16 HRc) 3,9 mm 0.1535 6,0 74,0 36,0 29,0 36,0 65009 64809 ≤3 DIAMETER 5/32 0.1562 3.97 6,0 74,0 36,0 29,0 36,0 55003 54803 DC = + 0, 0 0 2 /+ 0, 012 4,0 mm 0.1575 M4,5 X 0,5 6,0 74,0 36,0 29,0 36,0 65010 64810 DCON = h6 #21 0.1590 4.04 10-324,1 mm0.16146,0 74,0 36,0 29,0 36,0 55004 548046,074,036,029,036,06501164811>3–6 DIAMETERDC=+0,004/+0,016 4,2 mm 0.1654 M5 / M5 X 0,75 6,0 74,0 36,0 29,0 36,0 65012 64812 DCON = h6 4,3 mm 0.1693 6,0 74,0 36,0 29,0 36,0 65013 64813 11/64 0.1719 4.37 6,0 74,0 36,0 29,0 36,0 55005 54805 >6–10 DIAMETERDC=+0,006/+0,021 4,4 mm 0.1732 12-24 6,0 74,0 36,0 29,0 36,0 65014 64814 DCON = h6 4,5 mm 0.1772 M5 X 0,5 6,0 74,0 36,0 29,0 36,0 65015 64815 4,6 mm 0.1811 12-28 6,0 74,0 36,0 29,0 36,0 65016 64816 >10–18 DIAMETER DC = +0,007/+0,025 4,7 mm 0.1850 12-32 6,0 74,0 36,0 29,0 36,0 65017 64817 DCON = h6 3/16 0.1875 4.76 6,0 82,0 44,0 35,0 36,0 55006 54806 4,8 mm 0.1890 7/32-32 6,0 82,0 44,0 35,0 36,0 65018 64818 NON-FERROUS 4,9 mm 0.1929 6,0 82,0 44,0 35,0 36,0 65019 64819 5,0 mm 0.1969 M6 X 1 6,0 82,0 44,0 35,0 36,0 65020 64820 PLASTICS/COMPOSITES 5,1 mm 0.2008 1/4-20 6,0 82,0 44,0 35,0 36,0 65021 64821 13/64 0.2031 5.16 6,0 82,0 44,0 35,0 36,0 55007 54807 For patent 5,2 mm 0.2047 M6 X 0,75 6,0 82,0 44,0 35,0 36,0 65022 64822 information visit 5,3 mm 0.2087 6,0 82,0 44,0 35,0 36,0 65023 64823 www.ksptpatents.com 5,4 mm 0.2126 6,0 82,0 44,0 35,0 36,0 65024 64824 5,5 mm 0.2165 M6 X 0,5 6,0 82,0 44,0 35,0 36,0 65025 64825 7/32 0.2188 5.56 1/4-32 6,0 82,0 44,0 35,0 36,0 55008 54808 continued on next page 254 DRILLS www.kDyRoIcLeLrSa-sgstool.com