Общий каталог SGS 2021 - страница 252

FRACTIONAL & METRIC Hi-PerCarb® 30° 124° 3 OAL LCF LS LU DC DCON 131N 3xD TOLERANCES (inch) FRACTIONAL & METRIC SERIES ≤.1181 DIAMETER DC = +.00008/+.00047 • Triple margin design inch & mm EDP NO. DCON = h6 improves hole stability CUTTING DECIMAL METRIC TAP SIZE SHANK OVERALL FLUTE CLEARED SHANK UNCOATED Ti-NAMITE-B and size control while DIAMETER EQUIV. EQUIV. REFERENCE DIAMETER LENGTH LENGTH LENGTH LENGTH (TiB2) >.1181–.2362 DIAMETER providing superior DC ONLY DCON OAL LCF LU LS DC = +.00016/+.00063 finish, roundness and 9,2 mm 0.3622cylindricity M10 X 0,75 10,0 89,0 47,0 35,0 40,0 64662 67662 DCON = h6 9,3 mm 0.3661• Self-stabilizing pyramid 10,0 89,0 47,0 35,0 40,0 64663 67663 >.2362–.3937 DIAMETER point design stabilizes U 0.3680 9.35 7/16-14 10,0 89,0 47,0 35,0 40,0 54620 54720 DC = +.00024/+.00083 the drill on contact with 9,4 mm 0.3701the workpiece 10,0 89,0 47,0 35,0 40,0 64664 67664 DCON = h6 • Open flute structure 9,5 mm 0.3740 M11 / M10 X 0,5 10,0 89,0 47,0 35,0 40,0 64665 67665 >.3937–.7087 DIAMETER efficiently transports 3/8 0.3750 9.53 10,0 89,0 47,0 35,0 40,0 54621 54721 DC = +.00028/+.00098 chips while maintaining 9,6 mm 0.3780strength at high 10,0 89,0 47,0 35,0 40,0 64666 67666 DCON = h6 feed rates 9,7 mm 0.3819 10,0 89,0 47,0 35,0 40,0 64667 67667 >.7087–1.1811 DIAMETER • Sculpted gash allows 9,8 mm 0.3858 10,0 89,0 47,0 35,0 40,0 64668 67668 DC = +.00031/+.00114 chips to easily flow awayfrom the drill center9,9 mm0.3898 10,0 89,0 47,0 35,0 40,0 64669 67669 DCON = h6 • Recommended for 25/64 0.3906 9.92 7/16-20 10,0 89,0 47,0 35,0 40,0 54622 54722 materials ≤ 175 Bhn 10,0 mm 0.3937 10,0 89,0 47,0 35,0 40,0 64670 67670 TOLERANCES (mm) (≤ 16 HRc) 10,1 mm 0.3976 12,0 102,0 55,0 40,0 45,0 64671 67671 ≤3 DIAMETER 10,2 mm 0.4016 M12 X 1,75 12,0 102,0 55,0 40,0 45,0 64672 67672 DC = + 0, 0 0 2 /+ 0, 012 10,3 mm 0.4055 12,0 102,0 55,0 40,0 45,0 64673 67673 DCON = h6 13/32 0.4062 10.3210,4 mm0.4094 12,0 102,0 55,0 40,0 45,0 54623 5472312,0102,055,040,045,06467467674>3–6 DIAMETERDC=+0,004/+0,016 10,5 mm 0.4134 M12 X 1,5 12,0 102,0 55,0 40,0 45,0 64675 67675 DCON = h6 10,6 mm 0.4173 12,0 102,0 55,0 40,0 45,0 64676 67676 10,7 mm 0.4213 12,0 102,0 55,0 40,0 45,0 64677 67677 >6–10 DIAMETERDC=+0,006/+0,021 27/64 0.4219 10.72 1/2-13 12,0 102,0 55,0 40,0 45,0 54624 54724 DCON = h6 10,8 mm 0.4252 M12 X 1,25 12,0 102,0 55,0 40,0 45,0 64678 67678 10,9 mm 0.4291 12,0 102,0 55,0 40,0 45,0 64679 67679 >10–18 DIAMETER DC = +0,007/+0,025 11,0 mm 0.4331 M12 X 1 12,0 102,0 55,0 40,0 45,0 64680 67680 DCON = h6 11,1 mm 0.4370 12,0 102,0 55,0 40,0 45,0 64681 67681 7/16 0.4375 11.11 1/4-18NPT 12,0 102,0 55,0 40,0 45,0 54625 54725 NON-FERROUS 11,2 mm 0.4409 12,0 102,0 55,0 40,0 45,0 64682 67682 11,3 mm 0.4449 12,0 102,0 55,0 40,0 45,0 64683 67683 PLASTICS/COMPOSITES 11,4 mm 0.4488 12,0 102,0 55,0 40,0 45,0 64684 67684 11,5 mm 0.4528 M12 X 0,5 12,0 102,0 55,0 40,0 45,0 64685 67685 For patent 11,6 mm 0.4567 12,0 102,0 55,0 40,0 45,0 64686 67686 information visit 11,7 mm 0.4606 12,0 102,0 55,0 40,0 45,0 64687 67687 www.ksptpatents.com 11,8 mm 0.4646 12,0 102,0 55,0 40,0 45,0 64688 67688 11,9 mm 0.4685 12,0 102,0 55,0 40,0 45,0 64689 67689 15/32 0.4688 11.91 1/2-28 12,0 102,0 55,0 40,0 45,0 54626 54726 12,0 mm 0.4724 M14 X 2 12,0 102,0 55,0 40,0 45,0 64690 67690 continued on next page 252 DRILLS www.kDyRoIcLeLrSa-sgstool.com