Общий каталог SGS 2021 - страница 140

FRACTIONAL S-Carb® 38° POS ® 3 LF 43L • LU 43LC DC DCONDN FRACTIONAL SERIES RE APMX • Circular land allows inch EDP NO. TOLERANCES (inch) for increased controlat various speed andCUTTINGLENGTHOVERALL SHANK REACH NECK CORNER UNCOATED Ti-NAMITE-BDIAMETEROF CUTLENGTHDIAMETERLUDIAMETERRADIUS(TiB2)1/8–3/16 DIAMETER feed rates and reduces DC APMX LF DCON DN RE DC = +0.0000/–0.00032 chatter 1/8 5/32 3 1/8 1/2 .105 – 32700 32725 DCON = h6 • Symmetrical end gashingfor excellent balance1/85/32 3 1/8 1/2 .105 .010 32751 32815 RE = +0.0000/–0.0020 at high speeds and 1/8 5/32 3 1/8 3/4 .105 – 32691 34888 1/4–3/8 DIAMETER aggressive plungingcapability 3/16 7/32 3 3/16 1/2 .105 – 32701 32726 DC = +0.0000/–0.00035DCON = h6 • Open fluting for deep 3/16 7/32 3 3/16 1/2 .167 .010 32752 32816 RE = +0.0000/–0.0020 slotting and profiling• Necked design withblended diameter3/167/323 3/16 3/4 .167 – 32692 34889 1/2–5/8 DIAMETER1/43/82-1/21/43/4.230.0153578736235DC= +0.0000/–0.00043 transitions provideclearance to reach• Enhanced corner1/43/82-1/2 1/4 3/4 .230 .060 35788 36236 DCON = h61/43/841/43/4.230–3270232727RE= +0.0000/–0.0020 geometry with tight 1/4 3/8 4 1/4 3/4 .230 .010 32753 32817 3/4–1 DIAMETER tolerance corner radii 1/4 3/8 4 1/4 3/4 .230 .030 32754 32818 DC = +0.0000/–0.00051 • Recommended formaterials ≤ 150 Bhn(≤ 7 HRc)1/43/8 4 1/4 1-1/2 .230 – 32703 32728 DCON = h6RE= +0.0000/–0.00201/43/841/41-1/2.230.0103275532819 1/4 3/8 4 1/4 1-1/2 .230 .030 32756 32820 NON-FERROUS 1/4 3/8 4 1/4 2-1/8 .230 – 32704 32729 1/4 3/8 4 1/4 2-1/8 .230 .010 32757 32821 PLASTICS/COMPOSITES 1/4 3/8 4 1/4 2-1/8 .230 .030 32758 32822 5/16 7/16 4 5/16 1-1/8 .292 – 32705 32730 For patent information visit 5/16 7/16 4 5/16 1-1/8 .292 .030 32759 32823 www.ksptpatents.com 5/16 7/16 4 5/16 2-1/8 .292 – 32706 32731 5/16 7/16 4 5/16 2-1/8 .292 .030 32760 32824 3/8 1/2 3 3/8 1-1/8 .355 .015 35791 36239 3/8 1/2 3 3/8 1-1/8 .355 .090 35792 36240 3/8 1/2 4 3/8 1-1/8 .355 – 32707 32732 3/8 1/2 4 3/8 1-1/8 .355 .030 32762 32826 3/8 1/2 4 3/8 1-1/8 .355 .060 32763 32827 3/8 1/2 4 3/8 2-1/8 .355 – 32708 32733 3/8 1/2 4 3/8 2-1/8 .355 .030 32764 32828 3/8 1/2 4 3/8 2-1/8 .355 .060 32765 32829 1/2 5/8 3 1/2 1-3/8 .480 .015 35795 36243 1/2 5/8 4 1/2 1-3/8 .480 – 32709 32734 1/2 5/8 4 1/2 1-3/8 .480 .030 32767 32831 1/2 5/8 4 1/2 1-3/8 .480 .060 32768 32832 1/2 5/8 4 1/2 1-3/8 .480 .090 32769 32833 1/2 5/8 4 1/2 1-3/8 .480 .120 32770 32834 1/2 5/8 4 1/2 2-1/4 .480 .015 35796 36244 continued on next page 140 END MILLS wwwE.kNyDoMceILraLS-sgstool.com