Каталог Iscar токарные пластины ISO 2022 - страница 11

ISOTURN INSERTS USER GUIDE NR Chipformer 3 0.4 11˚ Double-sided sharp cutting edge with a 13º positive rake anglefor machining high temperature alloys at ap < 6 mm. R3M Chipformer 3° 17° 0.2 Double-sided insert for rough machining on stainless steel with a unique deflector geometry to improve chip control. Includes a wavy surface to prevent chip hammering. T3P Chipformer 10° 19° 0.3 Double-sided 6˚ negative flank trigone insert for high feed turning on steel. TNM Chipformer 2.9 3.7 Double-sided trigon for roughing applications. Feed ranges: 8.5˚ from 0.25 to 0.65 mm/rev. Depth of cut from 2 to 7 mm. EM-R Chipformer 1.55 0.28 Double-sided sharp cutting edge with a 13º positive rake angle 13º for machining high temperature alloys at ap < 6 mm. 21º HT/WG Chipformer 0.3 8˚ Double-sided for roughing applications. Feed range: 0.25 mm/rev to 0.8 mm/rev. Depth of cut from 2.00 to 10.0 mm. HM Chipformer 0.3 13˚ Feed range: 0.08 mm/rev to 0.75 mm/rev. Depth of cut from 1.5 mm to 8.0 mm. H3P Chipformer 0.25 • For heavy roughing applications 20° • Low cutting force for low horse power machines • Excellent chip control due to changeable land and a flexible chip breaker H4P Chipformer 0.3 • For heavy roughing applications 15° • For large depth of cut and high feed • Strong cutting edge credit to a wide land and large land angle H5P Chipformer 0.3 • For heavy roughing applications • For large depth of cut and high feed 20° • Extremely strong cutting edge credit to a wide land and large land angle • Suitable for high cutting conditions 131