Каталог Winstar монолитный инструмент 2020 - страница 204

Solid Carbide Endmills Recommended Cutting Conditions ら峿⎖⏙╒㜇 Table 002 H700 Seires EHSUS4, EHSUS6, EHSUS8 WORKING MATERIAL HARDENED STEEL HARDENED STEEL HARDENED STEEL CODE SKT, SKD SKT, SKD SKT, SKD HARDNESS HRC 45~55 HRC 55~60 HRC 60~70 Vc 208 M/min 195 M/min 129 M/min DIAMETER R.P.M FEED(mm/min) R.P.M FEED(mm/min) R.P.M FEED(mm/min) 6MM 11,050 2,450 10,335 2,000 6,890 1,210 8MM 8,255 2,440 7,735 1,995 5,200 1,215 10MM 6,630 2,450 6,110 1,970 4,160 1,215 12MM 5,525 2,450 5,135 1,985 3,445 1,210 14MM 4,680 2,420 4,420 1,995 2,925 1,200 16MM 4,095 2,420 3,900 2,000 2,535 1,285 18MM 3,640 2,420 3,445 2,000 2,275 1,200 20MM 3,250 2,400 3,055 1,970 2,015 1,180 25MM 2,600 2,400 2,470 1,990 1,625 1,190 Milling Amount (mm) 1.Use as highly rigid and accurate machine as possible. 2.If the rpm available is lower than the recommend condition, please reduce the feed rate to the same ratio. 3.Use long shank type please reduce the rpm and feed rate. 4.The Feed and RPM may be changed depending on the M/C conditions ,lubricating and cooling system. 2/ 䡰╾劌䚷汧⏪ㆶҷ汧乍㯮〙Ҹ 3/ 㯮〙惘憮ᾜ彂㟑虇屚ⶖ懁仵ҷ惘憮▛㵣ℚᾚ屎Ҹ 4/ 朆㥓⤚㎥⇞㚉懝⪶㟑屚嬥㉔㹐ᾚ屎惘憮ҷ懁仵Ҹ 5/ ⁴ᾙ㜇㙩䉉ら峿⇋虇懸䜅䠓㨬₅⁜榗嬥㯮╿䑏㹐ҷ⫍㹊⌆♐幹ҷ䃳䁠⍆┊亊伀ʫ䳘㛈崙Ҹ SA194