Общий каталог Widia 2017 - страница 1967

• Table of Contents
• Turning
• Turning • ISO Inserts
• Turning • Tools for External Turning and Internal Boring
• Turning • Tools for External Turning and Internal Boring
• Turning • Tools for Small Hole Boring
• com E1Turning • Grooving and Cut-Off
• Turning • Threading
• Indexable Milling
• Indexable Milling • Face Mills
• Indexable Milling • Chamfer Mills
• Indexable Milling • 90° Shoulder Mills
• Indexable Milling • Helical Mills
• Indexable Milling • Slotting Mills
• Indexable Milling • Copy Mills
• Solid End Milling
• Solid End Milling • High-Performance Solid Carbide End Mills
• Solid End Milling • General Purpose Solid Carbide End Mills
• Solid End Milling • High-Performance High-Speed Steel (HSS-E/PM)
• Solid End Milling • Burs
• Holemaking
• Holemaking • High-Performance Solid Carbide Drills
• Holemaking • Modular Drills
• Holemaking • Indexable Drills
• Holemaking • Modular Drills
• Holemaking • Indexable Drills
• Holemaking • Hole Finishing
• Tapping
• Tapping Portfolio
• Index by Order Number
• Index by Catalogue Number
• Global Contacts
• Informational Icons Guide
• Material Overview • DIN

Informational Icons Guide (continued) Solid End Milling Icons Helix Angle: 20° Helix Angle:25° Helix Angle:30° Helix Angle: 35° Helix Angle: 37° Helix Angle: 38° Helix Angle: 40° Helix Angle:45° Helix Angle:50° Helix Angle:60° Helix Angle: 43° DIN 6528 DIN 844 DIN 1835B DIN 6527 Through Coolant:Radial: DrillingThrough Coolant:Axial: Solid EndMillTool Dimensions:Flute Configuration: X(Variable)Tool Dimensions:Flute Configuration: 1Tool Dimensions:Flute Configuration: 2 Tool Dimensions: Tool Dimensions: Tool Dimensions: Tool Dimensions: Tool Dimensions: Flute Configuration: 3 Flute Configuration: 4 Flute Configuration: 5 Flute Configuration: 6 Flute Configuration: 7 Manufacturer’s Specs: JIS Holemaking Icons Countersinking/Stroke ChamferingDrilling Chain Drilling Drilling:Cross Hole Drilling:Half Cylinder Drilling: Corner Drilling: Drilling: Drilling: Drilling: Drilling 45° Inclined Entry Inclined Exit Exit Offset Stacked Plates Drilling: Convex Drilled Hole Reaming: ThroughHole Reaming: Blind Hole Reaming:Through Cross Reaming: Blind andCross Holes Drilling Depth: 3x Drilling Depth: 5x Drilling Depth: 8x Drilling Depth:12x Shank: CylindricalPlain )h6 Shank: CylindricalWhistle Notch 2°Flat Shank Shank: Cylindricalwith flat KM™ Shank Helix Angle 0° Helix Angle 30° DIN Number 212 DIN Number 6535 DIN Number 6537 Through Coolant:Radial: DrillingThrough Coolant:Radial: DrillingThrough Coolant:Radial: IndexableDrillingFlood Coolant:Reaming Through Coolant:MQL (MinimumQuantity Lubricant):Drilling Axial: Drilling Through Coolant:Axial Reaming Tool Dimensions:2-Flute/2-Margin/CoolantTool Dimensions:2-Flute/4-Margin/Coolant (continued) widia.com Z149