Общий каталог Sumitomo 2019 - 2020 - страница 571

ACP100 ACP200 ACP300 ACK200 ACK300 ACM200 ACM300 12.6 High-speedCast IronNon-ferrousMetalChamferingGroove /T-SlotR / 3DProfilingRadiusMulti-PurposeHigh FeedShoulderMillingFace MillingMillingCutters SEC-Sumi Dual Mill TSXR 13000R(S) Type Steel Stainless Steel Cast Iron Exotic Alloy Insert  Dimensions (mm) Grade Coated Carbide High-speed / Light K Process General-purpose K Roughing K Nose Cat. No. Radius Fig RE LNEX 130604PNER-L ● ● ● ● ● ● 0.4 1LNEX 130608PNER-L●●●●●●0.81Fig 1 RE H LNEX 130612PNER-L ● ● ● ● 1.2 1 LNEX 130616PNER-L ● ● ● ● 1.6 1 LNEX 130620PNER-L ● ● ● ● 2.0 1 LNEX 130624PNER-L ● ● ● ● 2.4 1 LNEX 130632PNER-L ● ● ● ● 3.2 1 LNEX 130604PNER-G ● ● ● ● ● ● ● 0.4 1 LNEX 130608PNER-G ● ● ● ● ● ● ● 0.8 1 LNEX 130612PNER-G ● ● ● ● ● ● ● 1.2 1 LNEX 130616PNER-G ● ● ● ● ● ● ● 1.6 1 LNEX 130620PNER-G ● ● ● ● ● ● ● 2.0 1 13 6.4 LNEX 130624PNER-G ● ● ● ● ● ● ● 2.4 1 LNEX 130632PNER-G ● ● ● ● ● ● ● 3.2 1 LNEX 130604PNER-H ● ● ● ● 0.4 1 LNEX 130608PNER-H ● ● ● ● 0.8 1 LNEX 130612PNER-H ● ● ● ● 1.2 1 LNEX 130616PNER-H ● ● ● ● 1.6 1 LNEX 130620PNER-H ● ● ● ● 2.0 1 LNEX 130624PNER-H ● ● ● ● 2.4 1 LNEX 130632PNER-H ● ● ● ● 3.2 1 Use peripheral inserts with RE of 0.8mm or less from the second step and above. Recommended Cutting Conditions ISO Work Material Hardness Cutting Speed vc (m/min) Feed Rate fz (mm/t) InsertMin. - Optimum - Max.Min. - Optimum - Max.Grade 180 to 280 HB 110 - 200 - 280 0.10 - 0.20 - 0.30 ACP100 Carbon Steel P > 280HB 70 - 135 - 200 0.10 - 0.20 - 0.30 ACP200 Alloy Steel 180 to 280 HB 90 - 155 - 220 0.10 - 0.15 - 0.25 ACP300 Stainless 220 to 280 HB 90 - 135 - 180 0.10 - 0.15 - 0.25 ACM200 M Steel > 280HB 70 - 115 - 160 0.10 - 0.15 - 0.25 ACM300 K Cast Iron / Ductile Cast Iron 250HB 125 - 175 - 225 0.10 - 0.20 - 0.30 ACK200ACK300 S Exotic Alloy Q 30 - 60 - 90 0.05 - 0.10 - 0.15 ACM200ACM300 Note · The above recommended cutting conditions may require adjustment depending on machine rigidity and work rigidity. · The above figures are guidelines for use with BT50 machine tools. · The above are the recommended cutting conditions for ae = diameter 20% or less. ● mark: Standard stocked item (new product/expanded item) H127