Общий каталог Sumitomo 2018 - 2019 - страница 464

Technical information Indexable Insert Type ”SumiDrill” WDX Type Multi-Purpose Functionality l Applications for machining centre l Hole profile Slant / Pre-drilled Inclined surface Drill Plain surface / Diameter t (mm) half hole t 13,0 - 18,0 0,4 18,5 - 28,5 0,6 29,0 - 36,0 0,8 37,0 - 55,0 1,2 Recommended conditions - reduce feed rate to 70% Applications for Lathes Drill Max. Offset Drill Max. Offset description (mm) description (mm) l Setting Instruction WDX130... 0,35 WDX280... 0,15 Ensure the face of the drill flange is hard against the face of the WDX135... 0,30 WDX285... 0,10 tool holder. WDX140... 0,25 WDX290... 1,00 Align the centreline of the drill to the centreline of the lathes Y WDX145... 0,20 WDX295... 0,95 axis WDX150... 0,15 WDX300... 0,90 WDX155... 0,40 WDX310... 0,80 WDX160... 0,40 WDX320... 0,70 Max. +/- 0,03mm WDX165... 0,35 WDX330... 0,55 WDX170... 0,30 WDX340... 0,45 WDX175... 0,25 WDX350... 0,35 WDX180... 0,20 WDX360... 0,20 WDX185... 0,50 WDX370... 1,00 WDX190... 0,45 WDX380... 1,00 WDX195... 0,40 WDX390... 0,90 WDX200... 0,30 WDX400... 0,80 Drilling Over Holes WDX205... 0,30 WDX410... 0,70 Offset the lathes X axis within the maximum amount stated in the WDX210... 0,20 WDX420... 0,60 table WDX215... 0,15 WDX430... 0,50 WDX220... 0,10 WDX440... 0,50 WDX225... 0,06 WDX450... 0,40 WDX230... 0,70 WDX460... 1,50 WDX235... 0,70 WDX470... 1,40 WDX240... 0,60 WDX480... 1,30 Enlarge Multi-Drills WDX245... 0,50 WDX490... 1,20 WDX250... 0,50 WDX500... 1,10 WDX255... 0,45 WDX510... 1,00 WDX260... 0,40 WDX520... 0,90 WDX265... 0,35 WDX530... 0,80 WDX270... 0,25 WDX540... 0,60 WDX275... 0,20 WDX550... 0,50 Recommended conditions - reduce feed rate to 30% Turning by lathes Outer turning (max. 2xD) Inner turning (max. 2xD) Recommended conditions - reduce feed rate to 50% K69