Каталог Stellram токарный инструмент - страница 20

Предыдущая страница Следующая страница

Навигация

-62 Geometry Technical Information

Finishing:

The -62 Geometry is one of the most versatile geometries for the

machining of Steels, Stainless Steels, High Nickel, High Cobalt and

Titanium based alloys. This positive geometry was designed for a wide

variety of finishing applications.

Available in Grade: SP4019

Materials Application

Cutting Condition

SP0819

P M K N S H

4 4 8

Profile

EPGT060204E-62 750 - 950 N/mm 2 HBN

Unalloyed Steel: 750 - 950 N/mmUnalloyed Steel: 2 HBN 220 - 270

EPGT21.51A-62 220 - 270

EPGT060204E-62

inchmm
0.1183,00
0.1002,50
0.0802,00
0.0601,50
-62
0.0401,00
0.0200,50
mm0,000,050,100,150,200,250,30
inch0.0000.0020.004f (feed/rev)0.006 0.0080.0100.015

n f (feed/rev) n

-64 Geometry Technical Information

Medium to Roughing:

The -64 Geometry is a very positive geometry, with polished top rake and

ground periphery. Specifically designed for the machining of Aluminum, Plastics and Soft Alloys.

Available in Grade: GH1

Materials Application

Cutting Condition

GH1

P M K N S H

4 4 8

Profile

-64 Inserts

Aluminium: <16% Si HBN 116

DCGT11T308F-64 Aluminium: <16% Si HBN 116 DCGT32.52A-64

inch mm DCGT11T308F-64

0.180 4,50

0.160 4,00

0.138 3,50

0.118-64 3,00
0.1002,50
0.0802,00
0.0601,50
0.0401,00
0.0200,50
mm0,100,200,300,400,500,60
inch0.0040.008f (feed/rev)0.0120.0160.0200.023

n f (feed/rev) n

Material Guide – Key to Recommended Inserts

Material Designation

PP Unalloyed Steels PP Alloyed Steels MM Stainless Steels MM PH Stainless KK Cast Irons NN Aluminum & Alloys SS High Temp. Alloys HH Hard Materials