Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | [email protected] 7745VS Series Face Milling and Chamfering Cutter Facing Chamfering 45° LEAD ANGLE – FACE MILLS 7745VS 7745VS cutters are designed for machining Tool Steel and Cast Iron. They feature exceptionally thick square inserts and are ideal for tough cutting conditions. The upper edge of the insert does 7745VS09: not rest against a pocket allowing for recessing operations. Maximum ap = 5mm Diameter Range = 16mm to 25mm Ideal for roughing, semi-finishing and finishing. These cutters are a very good choice for machining surfaces with heavy scale and are also ideal for machining surfaces with 7745VS12: irregular stock. Maximum ap = 7mm Diameter Range = 40mm to 125mm This family is available in two different insert sizes: SC..09 and SC..12 Note: Larger diameter Shell Mill Fixation cutters with interchangeable cartridges are 7745 cutters using 12mm inserts with 5mm thickness are able to cover irregular surfaces up available. Please see page A136. to 7mm ap. With its 0° axial and a radial negative rake angle this cutter has an excellent chip evacuation particularly when using the full depth of cut capacity. The smaller cutter series with 9mm inserts are ideal for facing small areas and chamfering any style component. www.kennametal.com A87