| Calculation of the average chip thickness in relation with the a | (Radial Engagement) if a | is less than 50% of Dia. |
| e | e |
| Formula: Programme Feed Rate (f ) | | h | = Average chip thickness | Formula: Average Chip Thickness (hm) |
| z | | m | |
| | a = Radial engagement | | |
| | | e | |
d f = Feed per tooth a
| f = h | x | | z | h | = f x | | e |
| z | m | a | | | m | z | |
| | e | d = Cutter diameter | | | | d |
| 5702V | ZD14 Ra | mp Angl | e ° | | |
| Insert Z | DCX1403... | FR-701 (Radi | us mm) | |
| Cutter dia. | Facet | 2,0mm | 2,50mm | 3,00mm | 4,00mm |
| 20mm | 11.0 | 9.8 | 9.0 | 8.0 | 6.3 |
| Metal | Removal | |
| Calculated with 24000 | RPM |
| Cutter | Z | Qmax - cm3/min |
| 20 | 2 | 720 |
*For Slotting applications with 5702VZD14 series the maximum ap The chart above shows total metal removal capacity
is 6mm. (based on 24,000 RPM) by cutter diameter and
number of teeth (2). The maximum RPM is engraved on all cutter bodies.
These tools are designed, manufactured, tested and balanced in
accordance with EN ISO 15641:2001 for maximum stability in high
speed applications.
Каталог Stellram твердосплавные цельные фрезы
Каталог Stellram токарный инструмент
Каталог Stellram системы со сменными пластинами для фрезерования с высокими подачами
Каталог Stellram высокопроизводительные фрезерные системы
Каталог Stellram материалы и сплавы