Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | [email protected] 5702VZD14 Milling Inserts, Recommended Feeds & Speeds l ZDCX14-701 Product Application & Material Dimensions (mm) d r s Roughing Semi-Finishing Finishing EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min ap max. ap min. - max. ap min. - max. 12* 1,00 - 4,00 0,20 - 1,00 029027 ZDCX1403PDFR-701 GH1 7,59 16,83 3,18 Facet 0,02 029028 ZDCX140320FR-701 GH1 7,59 16,83 3,18 2,0 0,02 Profiling & Pocketing Mills 026019 ZDCX140325FR-701 GH1 7,59 16,83 3,18 2,5 0,02 029029 ZDCX140330FR-701 GH1 7,59 16,83 3,18 3,0 0,02 026020 ZDCX140340FR-701 GH1 7,59 16,83 3,18 4,0 0,02 Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page A5. * Max. possible ap of 12mm and ae the full diameter (depending on the application). * For Slotting applications with 5702VZD14 series the maximum ap is 6mm. 5702VZD Feeds fz (mm/tooth) Speed vc (m/min) Geometry Grade Operation Aluminium & Alloys <16% Si 116 HBN Aluminium & Silicon >16% Si 92 HBN 5702VZD Series K10-K20/C3 - C2 ISO / ANSI Size Speed min. - max. Min. - Max. Min. - Max. Coolant Recommendation 14mm FR-701 GH1 Profile/ Pocketing 0,02 - 0,25 0,02 - 0,20 Recommended  Possible  Uncoated Micrograin ISO Materials Rm and GH1 Hardness Aluminium & Alloys 400 - 3050 N Aluminium < 16% Si 116 HBN & Alloys Aluminium + Silicon  > 16% Si 92 HBN 295 - 2440 www.kennametal.com A249