Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | [email protected] 7702VRD07 Milling Inserts & Recommended Feeds RDET07-701 RDHW07 Product Application & Material Dimensions (mm) d s Roughing Semi-Finishing Finishing EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min ap max ap min - max ap min - max Contour Mills - 0,30 - 1,30 0,10 - 0,50 034556 RDET0702M0E-701 SP4019 - - 7,00 - 2,38 3,50 0,03 034557 RDHW0702M0T SP4019 - 7,00 - 2,38 3,50 0,07 Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page A5. 7702VRD07 Feeds fz (mm/tooth) Geometry Grade Operation Unalloyed Steel Alloyed Steel Stainless Steel Stainless Steel Refractory PH Gray Iron Spheroidal- Ductile Iron Malleable Iron Aluminium & Alloys <16% Si 116 HBN Aluminium & Silicon >16% Si 92 HBN HTA Iron Based Alloys HTA Cobalt Based Alloys HTA Nickel Based Alloys HTA Titanium Based Alloys Hard Steel >1400 N/mm2 >415 HBN Chilled Cast Iron >1400 N/mm2 >400 HBN Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. E-701 SP4019 Contouring 0,05 - 0,12 0,05 - 0,10 - - 0,05 - 0,12 0,05 - 0,12 0,05 - 0,10 0,03 - 0,10 0,03 - 0,08 - - - - 0,03 - 0,05 0,03 - 0,05 T SP4019 Contouring 0,12 - 0,20 0,12 - 0,18 - - 0,12 - 0,20 0,12 - 0,20 0,12 - 0,18 - - - - - - 0,04 - 0,08 0,04 - 0,08 Note: HTA = High Temperature Alloys Speed recommendations can be found on page A226. www.kennametal.com A219