Каталог Stellram фрез со сменными пластинами - страница 191

Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | sales@sverla-ekb.ru 5315VA16 Milling Inserts 85° APHT16-46 APET16-48 APKT16-43 APKT16-45 d Product Application & Material Dimensions (mm) r l Roughing Semi-Finishing Finishing s Shoulder Mills EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min ap max* or ap max. and ap min. - max. ae max.* ae max. 15% D** 027869 APHT160408ER-46 X500 - 9,52 16,66 4,76 0,80 0,05 031495 APHT160408ER-46 SP6519 - 9,52 16,66 4,76 0,80 0,05 027870 APHT160416ER-46 X500 - 9,52 16,66 4,76 1,60 0,05 031496 APHT160416ER-46 SP6519 - 9,52 16,66 4,76 1,60 0,05 027871 APHT160424ER-46 X500 - 9,52 16,66 4,76 2,40 0,05 031497 APHT160424ER-46 SP6519 - 9,52 16,66 4,76 2,40 0,05 030811 APET1604PDER-48 X500 - 9,52 16,66 4,76 Facet 0,04 030773 APET1604PDER-48 SP6519 - 9,52 16,66 4,76 Facet 0,04 030860 APET160408ER-48 X500 - 9,52 16,66 4,76 0,80 0,04 030861 APET160408ER-48 SP6519 - 9,52 16,66 4,76 0,80 0,04 015156 APKT1604PDER-43 X500 - - 9,52 16,66 4,76 Facet 0,08 031468 APKT1604PDER-43 SP6519 - - 9,52 16,66 4,76 Facet 0,08 017294 APKT1604PDER-43 MP91M - - 9,52 16,66 4,76 Facet 0,08 027887 APKT1604PDER-43 SC3025 - - 9,52 16,66 4,76 Facet 0,08 023115 APKT1604PDER-45 X500 - - 9,52 16,66 4,76 Facet 0,08 031469 APKT1604PDER-45 SP6519 - - 9,52 16,66 4,76 Facet 0,08 023114 APKT1604PDER-45 MP91M - - 9,52 16,66 4,76 Facet 0,08 Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page A5. * Note: Please do not surpass the recommended max. ap for slotting as shown on the steel body page A188. * Note: Please respect the following rule for profiling with ap max: for Shell mill cutter ae < 75% of the Diameter for Taper 50 cutter ae < 60% of the Diameter ** Note: For semi finishing, axial engagement ap for slotting and radial engagement ae for profiling should be max. 15% of the Diameter. APKT1604PDER-43 X500 to be used for steel when unstable conditions Note: Feed recommendations can be found on page A192. Speed recommendations can be found on page A193. A190 www.kennametal.com