Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | [email protected] 5315VA12 Milling Inserts 85° ADGT12-721 ADET12-48 ADHT12-46 ADKT12-45 d Product Application & Material Dimensions (mm) r Roughing Semi-Finishing Finishing l s EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min Shoulder Mills ap max* or ap max. and ap min. - max. ae max.* ae max. 15% D** 029098 ADGT12T3PDFR-721 GH1 - 7,87 12,70 3,97 Facet 0,04 030856 ADET12T308ER-48 X500 - 7,87 12,70 3,97 0,80 0,04 030857 ADET12T308ER-48 SP6519 - 7,87 12,70 3,97 0,80 0,04 030807 ADET12T3PDER-48 X500 - 7,87 12,70 3,97 Facet 0,04 030770 ADET12T3PDER-48 SP6519 - 7,87 12,70 3,97 Facet 0,04 029329 ADHT12T308ER-46 X500 - - 7,87 12,70 3,97 0,80 0,05 030406 ADHT12T308ER-46 X700 - - 7,87 12,70 3,97 0,80 0,05 031526 ADHT12T308ER-46 SP6519 - 7,87 12,70 3,97 0,80 0,05 029327 ADHT12T3PDER-46 X500 - - 7,87 12,70 3,97 Facet 0,05 031525 ADHT12T3PDER-46 SP6519 - 7,87 12,70 3,97 Facet 0,05 027913 ADKT12T3PDER-45 X500 - 7,87 12,70 3,97 Facet 0,08 031514 ADKT12T3PDER-45 SP6519 - 7,87 12,70 3,97 Facet 0,08 027915 ADKT12T3PDER-45 MP91M - 7,87 12,70 3,97 Facet 0,08 027916 ADKT12T3PDER-45 SC3025 - 7,87 12,70 3,97 Facet 0,08 Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page A5. * Note: Please do not surpass the recommended max. ap for slotting as shown on the steel body page A184. * Note: Please respect the following rule for profiling with ap max: for Weldon shank cutter Diameter 25mm ae < 25% D for Weldon shank cutter Diameter 32mm ae < 35% D for Weldon shank cutter Diameter 40mm ae < 40% D for Shell mill cutter Diameter 40mm ae < 75% D ** Note: For semi finishing, axial engagement ap for slotting and radial engagement ae for profiling should be max. 15% of the Diameter. Note: Feed recommendations can be found on page A186. Speed recommendations can be found on page A187. www.kennametal.com A185