Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | [email protected] 5315VA12 Long Edge Milling Cutter (Porcupine) d1 Product Dimensions (mm) Spares L ap ap1 No. of No. of Screw Shoulder Mills EDP Item Description D L/H l1 d1 max max flutes inserts EDP EDP Tightening Slotting* Nm I1 ap 5315VA12 Weldon Shank max 029106 5315VA12WA025R23 25 96 40 25 23 15 2 4 027860 F3007T 022157 T8 1,40 029107 5315VA12WA025R35 25 106 50 25 35 - 2 6 027860 F3007T 022157 T8 1,40 D 029108 5315VA12WA032R35 32 110 50 32 35 20 3 9 027860 F3007T 022157 T8 1,40 029109 5315VA12WA040R45 40 130 60 40 45 22 3 12 027860 F3007T 022157 T8 1,40 Weldon Shank 5315VA12 Shell Mill Fixation 029110 5315VA12-A040R34 40 50 - 16 34 25 3 9 027860 F3007T 022157 T8 1,40 d1 * Note: Please do not surpass the recommended max. ap for slotting. Note: Please note that a maximum of 0,8mm insert radius is allowed on the 5315VA12 range of cutters. Larger radii inserts can be used on the leading pocket only if the body is modified by the end user. H ap max D Shell Mill Fixation 5315VA12 Technical Information (mm) Product Dimensions EDP Item Description Facing Ramping Helical Hole ap max Max Pitch Angle ° min. - max. Helical / RPM Flat Linear 029106 5315VA12WA025R23 25,00 - - - - 36100 029107 5315VA12WA025R35 25,00 - - - - 36100 029108 5315VA12WA032R35 32,00 - - - - 36100 Facing Pitch 029109 5315VA12WA040R45 40,00 - - - - 30400 029110 5315VA12-A040R34 40,00 - - - - 26400 A184 www.kennametal.com