Каталог Stellram фрез со сменными пластинами - страница 174
Навигация
Каталог Stellram твердосплавные цельные фрезы
Каталог Stellram токарный инструмент
Каталог Stellram системы со сменными пластинами для фрезерования с высокими подачами
Каталог Stellram высокопроизводительные фрезерные системы
Каталог Stellram материалы и сплавы
| SD | HT09-422 SDHT09-42 | 3 SD | MT09-41 SD | MW09-TN | d r | ||||||
| Product | A | pplication & Mater | ial | Dime | nsion | s (mm | ) | ||||
| Roughing | Semi-Finishing | Finishing | l s | ||||||||
| EDP | Item Description | Grade | Depth of Cut(mm) | d (IC) | l | s | r | hm min | |||
| ap max or ae max. | ap max. and ae max. 15% D | ap min. - max. | |||||||||
| 031261 | SDHT09T308EN-422 | X500 | - | 9,52 | 9,52 | 3,97 | 0,80 | 0,03 | |||
| 033075 | SDHT09T308EN-422 | SP6519 | - | 9,52 | 9,52 | 3,97 | 0,80 | 0,03 | |||
| 031260 | SDHT09T308EN-423 | X500 | - | - | 9,52 | 9,52 | 3,97 | 0,80 | 0,04 | ||
| 033074 | SDHT09T308EN-423 | SP6519 | - | 9,52 | 9,52 | 3,97 | 0,80 | 0,04 | |||
| 014410 | SDMT09T308EN-41 | X500 | - | 9,52 | 9,52 | 3,97 | 0,80 | 0,04 | |||
| 031479 | SDMT09T308EN-41 | SP6519 | - | 9,52 | 9,52 | 3,97 | 0,80 | 0,04 | |||
| 017325 | SDMT09T308EN-41 | MP91M | - | 9,52 | 9,52 | 3,97 | 0,80 | 0,04 | |||
| 015232 | SDMW09T308TN | X500 | - | - | 9,52 | 9,52 | 3,97 | 0,80 | 0,15 | ||
| 031482 | SDMW09T308TN | SP6519 | - | - | 9,52 | 9,52 | 3,97 | 0,80 | 0,15 | ||
| 017327 | SDMW09T308TN | MP91M | - | - | 9,52 | 9,52 | 3,97 | 0,80 | 0,15 |
Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page A5.
- Note: Please do not surpass the recommended max. ap for slotting as shown on the steel body page A172.
- Note: ap max. for profiling is only possible when a
e < 75% of the Diameter. ** Note: For semi finishing, axial engagement ap for slotting and radial engagement ae for profiling should be max. 15% of the Diameter. SDHT09T308EN-423 to be used in unstable conditions. Note: Feed recommendations can be found on page A174. Speed recommendations can be found on page A175.