Каталог Stellram фрез со сменными пластинами - страница 156

Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | sales@sverla-ekb.ru 80.0VR00-_R-20 Series Cartridge Face Milling Cutter Facing Ramping Pocketing Helical Helical Interpolation Interpolation with Bore Hole CARTRIDGE ROUND INSERT MILLING ASSEMBLIES 80.0VR00-_R-20 The 80.0VR00-_R-20 cutter series with 6,35mm thick round button inserts is one of our strongest cutters. 8000VR00-_R-20: These cutters machine very efficiently irregular surfaces and rough scale. They can also be Maximum ap = 10,00mm Diameter Range Da* = used in heavy duty applications up to 10mm depth of cut. 116mm to 416mm **Denotes non stock items diameter This cutter series has an anti-rotation design which ensures a precise number of indexes per 331mm - 416mm insert. This gives a maximum possible usage of the available edges for roughing applications. This unique patented pocket system prevents the inserts from rotating in the pocket, during heavy feed machining and unstable conditions. 8010VR00-_R-20: Applications: Maximum ap = 10,00mm The 80.0VR00-_R-20 cutters are assembled with cartridges for RD..2006.. milling inserts for Diameter Range Da* = 116mm to 216mm face milling applications. Available with medium pitch. **Denotes non stock items diameter 116mm - 216mm The cutters series 8000VR00-_R-20 has an unequal medium pitch for reducing vibration and are for roughing of Steel, Steel Alloys, Stainless Steel and Cast Iron. The cutter series 8010VR00-_R-20 has an equal medium pitch and is especially recommended for roughing, of High Temperature Alloys such as Iron Based Alloys, Cobalt Based Alloys, Nickel Based Alloys and Titanium. NOTE: The 80.0VR00-_R-20 series when mounted with cartridge 80VR00-_R-20 using RD..2006.. round button inserts cannot utilise the wiper cartridge for finishing, when a fine finished surface is required. www.kennametal.com A155