Каталог Stellram фрез со сменными пластинами - страница 152

Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | sales@sverla-ekb.ru 80.0VR00-_R-16 Milling Inserts & Recommended Feeds RPMT16-41 RPHT16-S RPHT16-T SPHX12-EN Product Application & Material Dimensions (mm) d s Cartridge Face Mills Roughing Semi-Finishing Finishing EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min ap max. ap min. - max. ap min. - max. 8,00 1,00 - 3,00 0,20 -1,00 015223 RPMT1606M0E-41 X500 - 16,00 - 6,35 8,00 0,05 017311 RPMT1606M0E-41 MP91M - 16,00 - 6,35 8,00 0,05 030390 RPHT1606M0S X400 - 16,00 - 6,35 8,00 0,15 017692 RPHT1606M0T X500 - 16,00 - 6,35 8,00 0,10 034566 RPHT1606M0T SP6519 - 16,00 - 6,35 8,00 0,10 Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page A5. RPHT1606MOS and RPHT1606MOT should be used for heavy duty applications. Product Application & Material Dimensions (mm) Roughing Semi-Finishing Finishing EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min ap max. ap min. - max. ap min. - max. - - 0,20 - 1,00 Wiper Inserts 017237 SPHX12M512EN GH1 - - 12,55 12,55 5,00 Wiper 0,02 031455 SPHX12M512EN SA9608 - - 12,55 12,55 5,00 Wiper 0,02 Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page A5. Note: Mounting instruction for wiper inserts refer to page A164. 80.0VR00-_R-16 Feeds fz (mm/tooth) Geometry Grade Operation Unalloyed Steel Alloyed Steel Stainless Steel Stainless Steel Refractory PH Gray Iron Spheroidal- Ductile Iron Malleable Iron Aluminium & Alloys <16% Si 116 HBN Aluminium & Silicon >16% Si 92 HBN HTA Iron Based Alloys HTA Cobalt Based Alloys HTA Nickel Based Alloys HTA Titanium Based Alloys Hard Steel >1400 N/mm2 >415 HBN Chilled Cast Iron >1400 N/mm2 >400 HBN Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. E-41 X500 Facing - - 0,04 - 0,27 0,04 - 0,16 - - - - - 0,04 - 0,13 0,04 - 0,13 0,04 - 0,13 0,04 - 0,16 - - E-41 MP91M Facing - - - - 0,10 - 0,35 0,10 - 0,35 0,10 - 0,30 - - - - - - - - S X400 Facing 0,15 - 0,50 0,15 - 0,45 - - - - - - - - - - - 0,10 - 0,15 0,10 - 0,15 T X500 Facing 0,15 - 0,45 0,10 - 0,40 0,10 - 0,40 0,10 - 0,35 0,10 - 0,40 0,10 - 0,40 0,10 - 0,35 - - 0,10 - 0,28 0,10 - 0,28 0,10 - 0,28 0,10 - 0,30 - - T SP6519 Facing 0,15 - 0,45 0,10 - 0,40 0,10 - 0,40 0,10 - 0,35 0,10 - 0,40 0,10 - 0,40 0,10 - 0,35 - - 0,10 - 0,28 0,10 - 0,28 0,10 - 0,28 0,10 - 0,30 - - Wiper Inserts Feed /revolution fn (mm / rev.) SPHX GH1 Facing 1,00 - 4,00 1,00 - 3,00 0,80 - 2,50 0,80 - 2,00 1,00 - 2,50 0,80 - 2,20 0,80 - 2,00 - - - - - - - - SPHX SA9608 Facing 1,00 - 4,00 1,00 - 3,00 0,80 - 2,50 0,80 - 2,00 1,00 - 2,50 0,80 - 2,20 0,80 - 2,00 - - 0,50 - 1,50 0,50 - 1,50 0,50 - 1,50 0,50 - 1,80 - - Note: HTA = High Temperature Alloys Speed recommendations can be found on page A152. www.kennametal.com A151