Каталог Stellram фрез со сменными пластинами - страница 126

Предыдущая страница Следующая страница

Навигация

80.0VOD45-_R-04 & -06 Series

Shoulder / Chamfering Spiral / Circular Helical Helical Pocketing Ramping Facing
Profiling / Interpolation Interpolation
Slotting with Bore Hole
80_0VOD45-_R-04 & -06
42° CARTRIDGE FACE MILLING ASSEMBLIES
The 80.0VOD45 cutters are designed to machine all materials. Octagonal inserts offer up to
eight economical cutting edges.80.0VOD45-_R-04:
Maximum ap = 3,50mm
80.0VOD45 cutters are assembled with cartridges for OD..0404.. or OD..0605.. milling inserts(ap1 max = 8mm)
for face milling applications.Effective Cutting Diameter
Range = 100mm to 400mm
The cutters series 8000VOD45 has an unequal medium pitch for reducing vibration and is
for roughing, semi-finishing and finishing of Steel, Steel Alloys, Stainless Steel, Cast Iron and** Denotes non stock items 8000VOD45
Aluminium Alloys.diameter 315 - 400mm
** Denotes non stock items 8010VOD45
series has an equal medium pitch and is especially recommended for diameter 100 - 200mm
The 8010VOD45
roughing, semi-finishing and finishing of High Temperature Alloys such as Iron Based Alloys,
Cobalt Based Alloys, Nickel Based Alloys and Titanium.
80.0VOD45-_R-06:
series can be assembled with a particular wiper cartridge for finishing when Maximum ap = 4,50mm
The 8000VOD45
a fine finished surface is required. The corresponding pocket on the body for the finishing(ap1 = 10mm)
Effective Cutting Diameter
cartridge is marked with a “F”.
Range = 100mm to 400mm
Note: The 8010 series are not possible to assemble with a wiper cartridge.** Denotes non stock items 8000VOD45

diameter 315 - 400mm ** Denotes non stock items 8010VOD45 diameter 100 - 200mm