Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | [email protected] 8000V-8010V Cartridge Milling Cutter Bodies d1 Product Dimensions (mm) Cartridge Spares Cartridge Face Mills H Weight incl. EDP Item Description D* H d1 No. of EDP Cartridges Teeth Cartridge kg D* Screw 8000V Bodies with Unequal Pitch 021921 8000V100RBODY 100 68 32 6 022646 7065 2,29 021922 8000V125RBODY 125 63 40 8 022646 7065 3,04 021923 8000V160RBODY 160 63 40 10 022646 7065 5,43 021924 8000V200RBODY 200 63 60 12 022646 7065 8,77 021925 8000V250RBODY 250 63 60 16 022646 7065 15,48 021926 8000V315RBODY** 315 80 60 20 022646 7065 29,85 021927 8000V400RBODY** 400 80 60 24 022646 7065 57,60 8010V Bodies with Equal Pitch 023071 8010V100RBODY** 100 68 32 6 022646 7065 2,29 021973 8010V125RBODY** 125 63 40 8 022646 7065 3,04 021974 8010V160RBODY** 160 63 40 10 022646 7065 5,43 Cutter Body 021975 8010V200RBODY** 200 63 60 12 022646 7065 8,77 ** Denotes non stock items. Note: Mounting instructions refer to pages A161 - A164. Note: D* is nominal diameter for most cutter assemblies except for 90 degree A-Style, 16mm & 20mm button and 12mm & 16mm High Feed assemblies. For these mentioned assemblies the cutter diameter will change, please see assembly pages for diameter detail. Product Spares X” Adjustment Insert Adjustment Insert EDP Item Description Range (mm) Screw EDP Screw Style EDP EDP Finishing Cartridge & Spares 014953 81FS00R-12 0,03-0,05 015266 D5013T 105241 T20 016858 72.602 SPHX12…. These cartridges, have a fine adjusting set screw and are set according to the dimension (axial shift) “X”. X = 0,03 - 0,05 mm (X = 0,02 mm with a pressed insert with a nose radius). 81 FS 00 Cartridge The following series assemblies with a wiper insert are possible: Cutter Inserts X 8000VR00... RP.. 16 + Wiper 8000VR 00 8000VOD45... OD..04 + Wiper 8000VOD45... OD..06 + Wiper 8000VS45... SC..12 + Wiper 8000VSE45... SD..12 + Wiper X The following series assemblies with a wiper inserts are not possible: 8000VS / VSE 45 Cutter Inserts 8000VXD92... Wiper not possible 8000VXE92... Wiper not possible 8000VA90... Wiper not possible X 8000VOD 45 Also, all 8010V cutter series are not possible to assemble with a wiper insert. www.kennametal.com A109