Общий каталог SGS 2021 - страница 50

FRACTIONAL Z-Carb 38° 35° 4 ≠ ≠ LF APMX DC DCON Z1B RE FRACTIONAL SERIES inch EDP NO. TOLERANCES (inch) • Unequal helix design reduces damaging CUTTING LENGTH OVERALL SHANK Ti-NAMITE-X Ti-NAMITE-X JetStream 1/8–1/4 DIAMETER harmonics by changing DIAMETER OF CUT LENGTH DIAMETER (TX) (TX) DC = +0.0000/–0.0012 the angle at which each DC APMX LF DCON W/FLAT cutting edge enters and DCON = h 6 exits the material 1/8 3/8 1-1/2 1/8 36358 – – RE = +0.0000/–0.0006 • Unequal flute spacing 5/32 7/16 2 3/16 36357 – – helps to disrupt the >1/4–3/8 DIAMETER rhythmic pattern created 3/16 7/16 2 3/16 36359 – – DC = +0.0000/–0.0016 by the cutting edge 7/32 7/16 2-1/2 1/4 36361 – – DCON = h 6 helping to suppress damaging harmonics 1/4 1/2 2-1/2 1/4 36344 – – RE = +0.0000/–0.0008 • Optimal material removal 1/4 3/4 2-1/2 1/4 36590 – – >3/8–1 DIAMETER rates through increased 9/32 5/8 2-1/2 5/16 36353 – – DC = +0.0000/–0.0020 feed and depths of cut DCON = h 6 • Ball nose design ideal for 5/16 13/16 2-1/2 5/16 36345 – – RE = +0.0000/–0.0010 finishing operations in 11/32 13/16 2-1/2 3/8 36354 – – complex workpieces 3/8 7/8 2-1/2 3/8 36346 36539 – • Recommended for STEELS materials ≤ 45 HRc 13/32 15/16 2-3/4 7/16 36355 36540 – (≤ 420 Bhn) 7/16 1 2-3/4 7/16 36347 36541 – STAINLESS STEELS 15/32 1 3 1/2 36356 36542 – CAST IRON 1/2 1 3 1/2 36348 36543 36846 HIGH TEMP ALLOYS 1/2 1-1/4 3-1/4 1/2 36591 36592 – TITANIUM 9/16 1-1/8 3-1/2 9/16 36349 36544 36847 5/8 1-1/4 3-1/2 5/8 36350 36545 36848 HARDENED STEELS 3/4 1-1/2 4 3/4 36351 36546 36849 1 1-1/2 4 1 36352 36547 36850 For patent RE = 1/2 Cutting Diameter (DC) information visit www.ksptpatents.com 50 END MILLS END MILLS www.kyocera-sgstool.com