Общий каталог SGS 2021 - страница 46

METRIC Z-Carb-AP 38° 35° 4 ≠ ≠ LF LU Z1MPIC • DC DCON Z1MPLC APMX DN METRIC SERIES RE mm EDP NO. TOLERANCES (mm) • Variable rake geometry alters and controls the CUTTING LENGTH OVERALL SHANK REACH NECK CORNER Ti-NAMITE-X Ti-NAMITE-X 6 DIAMETER cutting dynamic taking DIAMETER OF CUT LENGTH DIAMETER LU DIAMETER RADIUS W/FLAT DC = +0,000/–0,030 chatter suppression to an DC APMX LF DCON DN RE unprecedented level DCON = h 6 6,0 8,0 75,0 6,0 24,0 5,49 0,5 46821 – RE = +0,000/–0,050 • Unequal helix design changes the cutting 8,0 10,0 75,0 8,0 32,0 7,49 1,0 46822 – angle to improve >6–10 DIAMETER 8,0 10,0 75,0 8,0 32,0 7,49 2,0 46823 – DC = +0,000/–0,040 harmonics • Unequal flute spacing 10,0 12,0 100,0 10,0 40,0 9,50 1,0 46824 – DCON = h 6 helps to disrupt the 10,0 12,0 100,0 10,0 40,0 9,50 2,0 46825 – RE = +0,000/–0,050 rhythmic pattern created by the cutting edge 12,0 15,0 100,0 12,0 48,0 11,48 1,0 46826 46928 >10–20 DIAMETER helping to suppress 12,0 15,0 100,0 12,0 48,0 11,48 1,5 46827 46929 DC = +0,000/–0,050 damaging harmonics DCON = h 6 12,0 15,0 100,0 12,0 48,0 11,48 2,0 46828 46930 • Long reach design allows RE = +0,000/–0,050 for deeper and faster 12,0 15,0 100,0 12,0 48,0 11,48 3,0 46829 46931 cuts 12,0 26,0 83,0 12,0 36,0 11,48 2,5 – 42731 • Enhanced corner STEELS geometry with tight 12,0 26,0 83,0 12,0 36,0 11,48 3,0 – 42732 tolerance corner radii 12,0 26,0 83,0 12,0 36,0 11,48 4,0 – 42733 STAINLESS STEELS • Recommended for 16,0 32,0 92,0 16,0 42,0 15,49 2,5 – 42734 materials ≤ 45 HRc CAST IRON (≤ 420 Bhn) 16,0 32,0 92,0 16,0 42,0 15,49 4,0 – 42735 HIGH TEMP ALLOYS 16,0 32,0 92,0 16,0 42,0 15,49 6,0 – 42736 16,0 20,0 115,0 16,0 65,0 15,49 1,0 46830 46932 TITANIUM 16,0 20,0 115,0 16,0 65,0 15,49 1,5 46831 46933 HARDENED STEELS 16,0 20,0 115,0 16,0 65,0 15,49 2,0 46832 46934 16,0 20,0 115,0 16,0 65,0 15,49 3,0 46833 46935 For patent 16,0 20,0 115,0 16,0 65,0 15,49 4,0 46834 46936 information visit 16,0 20,0 115,0 16,0 65,0 15,49 5,0 46835 46937 www.ksptpatents.com 20,0 24,0 140,0 20,0 80,0 19,48 1,0 46836 46938 20,0 24,0 140,0 20,0 80,0 19,48 1,5 46837 46939 20,0 24,0 140,0 20,0 80,0 19,48 2,0 46838 46940 20,0 24,0 140,0 20,0 80,0 19,48 3,0 46839 46941 20,0 24,0 140,0 20,0 80,0 19,48 4,0 46840 46942 20,0 24,0 140,0 20,0 80,0 19,48 5,0 46841 46943 20,0 38,0 104,0 20,0 52,0 19,48 2,5 – 42737 20,0 38,0 104,0 20,0 52,0 19,48 4,0 – 42738 20,0 38,0 104,0 20,0 52,0 19,48 6,0 – 42739 46 END MILLS END MILLS www.kyocera-sgstool.com