Общий каталог SGS 2021 - страница 161

METRIC S-Carb® 35° POS ® 2 LF APMX DC DCON 47MB RE METRIC SERIES TOLERANCES (mm) mm EDP NO. • Circular land reduces 3 DIAMETER CUTTING LENGTH OVERALL SHANK UNCOATED Ti-NAMITE-B edge aggressiveness DC = +0,000/–0,006 DIAMETER OF CUT LENGTH DIAMETER (TiB2) for varied speed and DCON = h6 DC APMX LF DCON feed rates RE = +0,0127/–0,0127 3,0 8,0 38,0 3,0 44570 44598 • 2 Flutes effectively >3–6 DIAMETERDC= +0,000/–0,008 4,0 11,0 50,0 4,0 44571 44599 manage the large sizeand volume of chips DCON = h6RE= +0,0127/–0,0127 5,0 13,0 50,0 5,0 44572 44600 produced during theaggressive machining6,013,057,06,04457344601process >6–10 DIAMETERDC= +0,000/–0,009DCON = h6RE= +0,0127/–0,01278,0 19,0 63,0 8,0 44574 44602 • Excellent balance10,022,072,010,04457544603at high speeds andaggressive plunging12,026,083,012,04457644604capability >10–18 DIAMETERDC= +0,000/–0,012 14,0 26,0 83,0 14,0 44577 44605 • Ball nose design idealfor finishing operations DCON = h6 16,0 32,0 92,0 16,0 44578 44606 in complex workpieces RE = +0,0127/–0,0127 >18–25 DIAMETERDC= +0,000/–0,013 20,0 37,3 104,0 20,0 44579 44607 • Recommended for25,038,0104,025,04458044608materials ≤ 150 Bhn(≤ 7 HRc) DCON = h6RE= +0,0127/–0,0127 RE = 1/2 Cutting Diameter (DC) NON-FERROUS PLASTICS/COMPOSITES For patent 35° POS information visitwww.ksptpatents.com 2 LF LU DC DCON DN 47MLB RE APMX METRIC SERIES TOLERANCES (mm) mm EDP NO. • Circular land reduces 6 DIAMETER CUTTING LENGTH OVERALL SHANK REACH NECK UNCOATED Ti-NAMITE-B edge aggressiveness DC = +0,000/–0,008 DIAMETER OF CUT LENGTH DIAMETER LU DIAMETER (TiB2) for varied speed and DCON = h6 DC APMX LF DCON DN feed rates RE = +0,0127/–0,0127 6,0 10,0 100,0 6,0 54,0 5,62 44581 44615 • 2 Flutes effectively >6–10 DIAMETERDC= +0,000/–0,009DCON = h6RE= +0,0127/–0,01278,012,0 100,0 8,0 54,0 7,62 44582 44616 manage the large sizeand volume of chips10,012,0100,010,054,09,624458344617produced during theaggressive machining12,016,0150,012,080,011,624458444618process >10–18 DIAMETER 16,0 20,0 150,0 16,0 80,0 15,62 44585 44619 • Excellent balance DC = +0,000/–0,011DCON = h6 20,0 25,0 150,0 20,0 80,0 19,62 44586 44620 at high speeds andaggressive plunging RE = +0,0127/–0,0127 RE = 1/2 Cutting Diameter (DC) capability >18–20 DIAMETER • Necked design with DC = +0,000/–0,013 blended diameter DCON = h6 transitions provide RE = +0,0127/–0,0127 clearance to reach • Ball nose design ideal NON-FERROUS for finishing operations in complex workpieces PLASTICS/COMPOSITES • Recommended for materials ≤ 150 Bhn For patent (≤ 7 HRc) information visit wwww.kwsptwpa.teknytso.cocmerEaN-DsgMstILoLoSl.com END MILLS 161