Общий каталог SGS 2021 - страница 158

FRACTIONAL S-Carb® 35° POS ® 2 LF APMX DC DCON 47B RE FRACTIONAL SERIES inch EDP NO. TOLERANCES (inch) • Circular land reduces edge aggressiveness for CUTTING LENGTH OVERALL SHANK UNCOATED Ti-NAMITE-B 1/8–3/16 DIAMETER varied speed and feed DIAMETER OF CUT LENGTH DIAMETER (TiB2) DC = +0.0000/–0.00032 rates DC APMX LF DCON DCON = h 6 • 2 Flutes effectively 1/8 3/8 1-1/2 1/8 34630 34669 RE = +.0005/–.0005 manage the large size and volume of chips 3/16 9/16 2 3/16 34631 34670 1/4–3/8 DIAMETER produced during the 1/4 3/4 2-1/2 1/4 34632 34671 DC = +0.0000/–0.00035 aggressive machining 5/16 13/16 2-1/2 5/16 34633 34672 DCON = h 6 process RE = +.0005/–.0005 • Excellent balance at high 3/8 1 2-1/2 3/8 34634 34673 speeds and aggressive 1/2–5/8 DIAMETER plunging capability 1/2 1-1/4 3-1/4 1/2 34635 34674 DC = +0.0000/–0.00043 • Ball nose design ideal for 5/8 1-5/8 3-3/4 5/8 34636 34675 DCON = h 6 finishing operations in 3/4 1-5/8 4 3/4 34637 34676 RE = +.0005/–.0005 complex workpieces • Recommended for 1 2 4-1/2 1 34638 34677 3/4–1 DIAMETER materials ≤ 150 Bhn RE = 1/2 Cutting Diameter (DC) DC = +0.0000/–0.00051 (≤ 7 HRc) DCON = h 6 RE = +.0005/–.0005 NON-FERROUS PLASTICS/COMPOSITES 35° POS 2 For patent information visit www.ksptpatents.com LF LU DC DCON 47LB RE APMX DN FRACTIONAL SERIES inch EDP NO. TOLERANCES (inch) • Circular land reduces edge aggressiveness for CUTTING LENGTH OVERALL SHANK REACH NECK UNCOATED Ti-NAMITE-B 1/4–3/8 DIAMETER varied speed and feed DIAMETER OF CUT LENGTH DIAMETER LU DIAMETER (TiB2) DC = +0.0000/–0.00035 rates DC APMX LF DCON DN DCON = h 6 • 2 Flutes effectively 1/4 3/8 4 1/4 2-1/8 .235 34650 34686 manage the large size RE = +.0005/–.0005 and volume of chips 3/8 1/2 4 3/8 2-1/8 .360 34651 34687 1/2–5/8 DIAMETER produced during the aggressive machining 1/2 5/8 6 1/2 2-1/8 .485 34652 34688 DC = +0.0000/–0.00043 process 1/2 5/8 6 1/2 3-3/8 .485 34653 34689 DCON = h 6 • Excellent balance at high RE = +.0005/–.0005 speeds and aggressive 5/8 3/4 6 5/8 2-3/8 .610 34655 34691 plunging capability 3/4–1 DIAMETER 5/8 3/4 6 5/8 3-3/8 .610 34654 34690 • Necked design with DC = +0.0000/–0.00051 blended diameter 3/4 1 6 3/4 2-1/2 .735 34656 34693 DCON = h 6 transitions provide 3/4 1 6 3/4 3-3/8 .735 34657 34692 RE = +.0005/–.0005 clearance to reach • Ball nose design ideal for RE = 1/2 Cutting Diameter (DC) NON-FERROUS finishing operations in complex workpieces PLASTICS/COMPOSITES • Recommended for materials ≤ 150 Bhn (≤ 7 HRc) For patent information visit www.ksptpatents.com 158 END MILLS END MILLS www.kyocera-sgstool.com