Общий каталог SGS 2021 - страница 157

FRACTIONAL S-Carb® 35° POS ® 2 LF APMX DC DCON 47 FRACTIONAL SERIES TOLERANCES (inch) inch EDP NO. • Circular land reduces 1/8–3/16 DIAMETER CUTTING LENGTH OVERALL SHANK UNCOATED Ti-NAMITE-B edge aggressiveness DIAMETER OF CUT LENGTH DIAMETER (TiB2) for varied speed and DC = +0.0000/–0.00032 DC APMX LF DCON feed rates DCON = h 6 1/8 3/8 1-1/2 1/8 34620 34660 • 2 Flutes effectively 1/4–3/8 DIAMETER manage the large size 3/16 9/16 2 3/16 34621 34661 and volume of chips DC = +0.0000/–0.00035 1/4 3/4 2-1/2 1/4 34622 34662 produced during the DCON = h 6 aggressive machining 5/16 13/16 2-1/2 5/16 34623 34663 process 1/2–5/8 DIAMETER 3/8 1 2-1/2 3/8 34624 34664 • Excellent balance DC = +0.0000/–0.00043 at high speeds and DCON = h 6 1/2 1-1/4 3-1/4 1/2 34625 34665 aggressive plunging 5/8 1-5/8 3-3/4 5/8 34626 34666 capability 3/4–1 DIAMETER 3/4 1-5/8 4 3/4 34627 34667 • Recommended for DC = +0.0000/–0.00051 materials ≤ 150 Bhn DCON = h 6 1 2 4-1/2 1 34628 34668 (≤ 7 HRc) NON-FERROUS PLASTICS/COMPOSITES 35° POS For patent information visit 2 www.ksptpatents.com LF LU DC DCON DN 47L APMX FRACTIONAL SERIES TOLERANCES (inch) inch EDP NO. • Circular land reduces 1/4–3/8 DIAMETER CUTTING LENGTH OVERALL SHANK REACH NECK UNCOATED Ti-NAMITE-B edge aggressiveness DIAMETER OF CUT LENGTH DIAMETER LU DIAMETER (TiB2) for varied speed and DC = +0.0000/–0.00035 DC APMX LF DCON DN feed rates DCON = h 6 1/4 3/8 4 1/4 2-1/8 .235 34640 34678 • 2 Flutes effectively 1/2–5/8 DIAMETER manage the large size 3/8 1/2 4 3/8 2-1/8 .360 34641 34679 and volume of chips DC = +0.0000/–0.00043 1/2 5/8 6 1/2 2-1/8 .485 34642 34680 produced during the DCON = h 6 aggressive machining 1/2 5/8 6 1/2 3-3/8 .485 34643 34681 process 3/4–1 DIAMETER DC = +0.0000/–0.00051 5/8 3/4 6 5/8 2-3/8 .610 34644 34682 • Excellent balance at high speeds and DCON = h 6 5/8 3/4 6 5/8 3-3/8 .610 34645 34683 aggressive plunging 3/4 1 6 3/4 2-1/2 .735 34646 34684 capability 3/4 1 6 3/4 3-3/8 .735 34647 34685 • Necked design with NON-FERROUS blended diameter transitions provide PLASTICS/COMPOSITES clearance to reach • Recommended for materials ≤ 150 Bhn For patent (≤ 7 HRc) information visit www.ksptpatents.com 157 END MILLS www.kyocera-sgstool.com END MILLS